Front Access

The defining feature of the Studio Pro design is its front access. Simply lift the chamber to expose the entire floor. It's wall-free and wide open.

Front access is perfect for glass placement: simply build directly on your shelf and close the chamber. Front access is also great when using tools that require a horizontal approach such as raking, roll ups and manipulation techniques.

Top Access

The Studio Pro 14 features top access as part of the dual access design.

Top access is excellent for the loading of shelves and forms as it allows for easy and precise placement. Top access is also preferred for many vertical-approach manipulation techniques such as embossing.

Full Firebrick Design

The Studio Pro 14 is constructed completely of firebrick including the lid.

Firebrick is desired in a glass kiln as it stores heat in the beginning of the firing which acts to smooth out temperature swings. It then releases heat slowly at the completion of the firing resulting in very calm annealing, especially over an annealing range. It's just beautiful.

As with any glass kiln, you want a portion of firebrick in the mix.

Swing View Equipped

Studio Pro 14 temperature controls are fitted to our Swing View Adjustable Enclosure.

The swing view is a pivoting, swing-up enclosure that allows you to rotate the control to a comfortable viewing and programming angle. Once you're done, lay it back down to see it from across your studio. It's that simple.

The swing view pairs well with touchscreen controls like the TAP II as viewing angle can be perfectly aligned. You'll love it.

Quiet Drive Solid State Relay

Studio Pro 14 models are standard equipped with our Quiet Drive Solid State Relay.

Our Quiet Drive Solid State Relay System offers tight temperature control, high reliability and increased heating element life. The Quiet Drive is arguably the best designed and best performing solid state system on the market.

Relay Access Port

The Studio Pro 14 incorporates our Relay Access Port for simple, no-panel-off relay replacement.

Simply remove the access plate to gain access to the mechanical relay. There's no need to remove the control panel and dig into the internal wiring. It's absolutely simple and effective and all it takes is a screwdriver!

It's a given that mechanical relays will fail at some point. This relay access port really comes in handy when they do.

Bench-Top Operation

The Studio Pro 14 is designed to be placed directly on your counter or bench-top or within the included floor stand (see below), the choice is yours.

Bench-top operation positions the kiln at waist level for very comfortable front access use.

Please note that counters and bench tops must be constructed of non-combustible material and be capable of supporting the load of the kiln.

Curved Element Routes

Heating element routes in the Studio Pro 14 lid are all curves. There's not a straight line to be found. These curved routes promote additional element retention.

They are also designed to follow the chamber perimeter which is vitally important for proper temperature distribution.

Floor Stand included

The Studio Pro 14 is supplied with a 16" stand for optional floor placement if desired.

Multiple Control Options

The Studio Pro 14 is available in a variety of controls including the Icon, Icon+, Tap II and Rampmaster 3.

At Evenheat we take the best control platforms on the market and make them even better by adding Special Limits thermocouples for precise temperature sensing and non-metallic faceplates for stellar Wi-Fi reception for on-line Apps.

Voltage Options

Our default production for Studio Pro 14 is 120V, Single Phase.

We do offer to build in 200V, 208V, 220V, 230V and 240V by request.

All controls available on the Studio Pro 14 will operate properly on both 50Hz and 60Hz line frequencies. To say it another way, line frequency has no effect. It doesn't matter.

Evenheat recommends that you check your operating voltage before ordering or placing the kiln in service.

Voltage Phase Options

Studio Pro 14 models are produced in a single phase design only.

3 phase Delta and Y (380V, 400V and 415V) designs are not available.

• Chamber Dimensions: 14.5" L x 14.5" W x 6.5" D - 0.80 Cubic Feet
  (37cm L x 37cm W x 16.5cm D - 22.7L)
• Outside Dimensions: 27" L x 25.5" W x 32" H (with 16" stand)
  (68.6cm D x 64.8m W x 81.3cm H)
• Maximum Use Temperature: 1650°F (900°C)
• Standard Electrical: 120 Volts, 15 Amps, 1800 Watts, 50/60Hz, Single Phase
  Power Cord Plug Configuration - NEMA 5-20
  Available in 200V, 208V, 220V, 230V and 240V by request
  Operates properly on both 50Hz and 60Hz
  Consult with an electrician for proper fuse panel, service wire size, receptacle, and fusing requirements. This model, used for its intended and expected purpose, would not be defined as "continuous use". Continuous use is defined as continuous, full power on for 3+ hours.
• Weight: 100lb. (45.5Kg) - Approx.
• Shipping Method: Freight Truck
  NRTL Listing Agency - TUV Listed United States and Canada - Designed and Tested to CSA & U/L 499

Product description and specifications courtesy of Evenheat Kiln, Inc. Specifications subject to change by the manufacturer.

• Made to order in the USA and shipped direct from the manufacturer in Caseville, MI. We confirm current lead time with you when you order.
• Ships by motor freight (LTL truck) — freight is quoted upfront, before you pay for it. Residential liftgate delivery is available.
• Questions? Call (737) 231-1880 or use Get a Quote. Try our Electrical Readiness Checker.
• See our Shipping Policy and Return Policy.