Top Load

The RM 1413 is a top loading design and offers a chamber 14.5" diameter x 13.5" deep.

Wonderful Lid Handle

We love handles. Handles have to be properly sized and shaped for the job. Our lid handles make this point by offering an 8" handle that's easy to grasp and operate.

These wide, corner mounted handle allows for confident and easy lifting, even with a gloved hand. It's unlike any other and it's a joy to use.

2 Position Lid Vent

The RM 1413 is equipped with a 2 position lid vent. Perfect for speeding up the cooling process.

Swing View Equipped

The RM 1413 temperature controls are fitted to our Swing View Adjustable Enclosure.

The swing view is a pivoting, swing-up enclosure that allows you to rotate the control to a comfortable viewing and programming angle. Once you're done, lay it back down to see it from across your studio. It's that simple.

The swing view pairs well with touchscreen controls like the TAP II, Icon+ and Icon as viewing angle can be perfectly aligned. You'll love it.

Swing-Away Peephole Covers

Our kiln designs feature swing-away peephole covers as opposed to plugs.

Plugs get lost and they get broken. Our attached peephole covers remain on the kiln and simply swing open and closed. You won't lose them and they certainly won't break.

Lid Prop

The RM 1413 is provided with a lid prop bar that positively keeps the lid in the open position. Simple operation is made even easier with our well designed lid handle.

Relay Access Port

The RM 1413  incorporates our Relay Access Port for simple, no-panel-off relay replacement.

Simply remove the access plate to gain access to the mechanical relays. There's no need to remove the control panel and dig into the internal wiring. It's absolutely simple and effective and all it takes is a screwdriver!

It's a given that mechanical relays will fail at some point. This relay access port really comes in handy when they do.

Full Stainless Steel Jackets

Multi-section, multi-jacketed kilns were conceived to lower production costs for the kiln manufacturer and to make life easier for the person installing the kiln. These are worthy goals but they come at the cost of kiln quality. It's a trade off we're not willing to make.

We build our kilns with full stainless jackets from top to bottom. Full stainless jackets mean absolutely solid, life extending construction. There are no leaks, no shifting and no weakness. Insist on Full Stainless Jackets for true build quality.

Multiple Control Options

The RM 1413 is available in a variety of controls including the Icon, Icon+, Tap II and Rampmaster II.

At Evenheat we take the best control platforms on the market and make them even better by adding Special Limits thermocouples for precise temperature sensing and non-metallic faceplates for stellar Wi-Fi reception for on-line Apps.

Quiet Drive Solid State Relay Option

The RM 1413 is available with our Quiet Drive Solid State Relay option.

Our Quiet Drive Solid State Relay System offers tight temperature control, high reliability and increased heating element life. We fully expect our solid state relay to last the life of the unit. You want this!

Voltage Options

Production for the RM 1413 is 240V.

All controls available on the RM 1413 will operate properly on both 50Hz and 60Hz line frequencies. To say it another way, line frequency has no effect. It doesn't matter.

Evenheat recommends that you check your operating voltage before ordering or placing the kiln in service.

Voltage Phase Options

The RM 1413 is not available in 3 phase Delta or Wye.

• Chamber Dimensions: 14.5" Diameter x 13.5" Deep - 1.30 Cubic Feet
  (36.8cm Diameter x 34.3cm Deep - 36.8L)
• Outside Dimensions: 25.75" D x 19.5" W x 26.5" H (with 8" stand)
  (65.4cm D x 49.5 W x 67.3cm H)
• Maximum Use Temperature: 2300°F (1260°C) / Cone 8
• Standard Electrical: 240 Volts, 15 Amps, 3600 Watts, 50/60Hz, Single Phase
  Power Cord Plug Configuration - NEMA 6-20
  Operates properly on both 50Hz and 60Hz
  Not Available in 3 phase Delta or Wye designs
  Consult with an electrician for proper fuse panel, service wire size, receptacle, and fusing requirements. This model, used for its intended and expected purpose, would not be defined as "continuous use". Continuous use is defined as continuous, full power on for 3+ hours.
• Weight: 85lb. (38.6Kg) - Approx.
• Shipping Method: Freight Truck
  NRTL Listing Agency - TUV Listed United States and Canada - Designed and Tested to CSA & U/L 499

Product description and specifications courtesy of Evenheat Kiln, Inc. Specifications subject to change by the manufacturer.

• Made to order in the USA and shipped direct from the manufacturer in Caseville, MI. We confirm current lead time with you when you order.
• Ships by motor freight (LTL truck) — freight is quoted upfront, before you pay for it. Residential liftgate delivery is available.
• Questions? Call (737) 231-1880 or use Get a Quote. Try our Electrical Readiness Checker.
• See our Shipping Policy and Return Policy.