Top Load

The HF 2327 is a top loading design and offers a chamber 23.5" diameter x 27 deep.

Lid Lift Assist

To assist in opening and closing we have equipped the HF 2327 with our patented Dyna-Lift lid lift assist.

The Dyna-Lift lightens the force needed to operate the kiln lid by attaching and lifting at a single point, the lid handle. The lift assist is not attached to the kiln chamber at all. All heavy lifting forces are directed entirely to the kiln stand and not the kiln itself. It's a wonderful design that places no lifting forces onto the chamber which would only weaken it.

The Dyna-Lift Lid Lift Assist is the best designed, best performing lift assist available.

Multi-Zone Control

The HF 2327 is designed with multi-zone control. Multi-Zone control means the kiln uses more than one thermocouple (temperature sensor) to control the heat in the firing chamber.

The kiln chamber is divided into heat zones, each with its own thermocouple. Each zone temperature is controlled very precisely. The end result is a very even temperature distribution from top to bottom.

2 Position Lid Vent

The HF 2327 is equipped with a 2 position lid vent. Perfect for speeding up the cooling process.

Swing View Equipped

The HF 2327 temperature controls are fitted to our Swing View Adjustable Enclosure.

The swing view is a pivoting, swing-up enclosure that allows you to rotate the control to a comfortable viewing and programming angle. Once you're done, lay it back down to see it from across your studio. It's that simple.

The swing view pairs well with touchscreen controls like the TAP I and Icon+ as viewing angle can be perfectly aligned. You'll love it.

3" Firebrick with No Loss of Chamber Volume

Historically kiln designs were based on 2-1/2" firebrick. As 3" firebrick began to show favor in high temperature designs many kiln manufacturers simply reduced the firing chamber size to accommodate the thicker firebrick while leaving the outside dimensions the same.

At Evenheat we took a different direction. Instead of making the chamber smaller we kept it the same while increasing the outside dimensions. In this way there is no loss in chamber volume and common, standard kiln furniture would continue to fit. Nice.

Swing-Away Peephole Covers

Our kiln designs feature swing-away peephole covers as opposed to plugs.

Plugs get lost and they get broken. Our attached peephole covers remain on the kiln and simply swing open and closed. You won't lose them and they certainly won't break.

Lid Prop

The HF 2327 is provided with a lid prop bar that positively keeps the lid in the open position. Simple operation is made even easier with our well designed lid handle.

Relay Access Port

The HF 2327  incorporates our Relay Access Port for simple, no-panel-off relay replacement.

Simply remove the access plate to gain access to the mechanical relays. There's no need to remove the control panel and dig into the internal wiring. It's absolutely simple and effective and all it takes is a screwdriver!

It's a given that mechanical relays will fail at some point. This relay access port really comes in handy when they do.

Single Maintenance Line & Full Jackets

Our 27" deep models feature a "Maintenance Line". The Maintenance Line is a split in the jacket between the upper and lower chamber that allows these models to be partially disassembled for ease in element replacement and kiln installation.

The upper chamber section is held securely in place through the use of stainless steel plates and screws. Simply remove the screws and separate the sections for maintenance or installation.

We do not use buckles to hold the sections together as they tend to loosen and allow shifting during loading, unloading and use.

Multiple Control Options

The HF 2327 is available in a variety of Multi-Zone controls including the TAP I, Icon+ and Rampmaster II. Multi-Zone controls use multiple thermocouples (temperature sensors) to provide excellent temperature distribution throughout the firing chamber.

At Evenheat we take the best control platforms on the market and make them even better by adding Special Limits thermocouples for precise temperature sensing and non-metallic faceplates for stellar Wi-Fi reception for on-line Apps.

Quiet Drive Solid State Relay Option

The HF 2327 is available with our Quiet Drive Solid State Relay option.

Our Quiet Drive Solid State Relay System offers tight temperature control, high reliability and increased heating element life. We fully expect our solid state relay to last the life of the unit. You want this!

Voltage Options

Production for the HF 2327 is 240V.

We do offer to build in 200V, 208V, 220V, 230V, 380V, 400V and 415V by request.

All controls available on the HF 2327 will operate properly on both 50Hz and 60Hz line frequencies. To say it another way, line frequency has no effect. It doesn't matter.

Evenheat recommends that you check your operating voltage before ordering or placing the kiln in service.

Voltage Phase Options

The HF 2327 is available in 3 phase Delta and Wye (380V, 400V and 415V) designs by request.

• Chamber Dimensions: 23.5" Diameter x 27" Deep - 7.0 Cubic Feet
  (59.7cm Diameter x 68.6cm Deep - 198L)
• Outside Dimensions: 35.5" D x 29.5" W x 41" H (with 8" stand)
  (90.2cm D x 74.3 W x 104cm H)
• Maximum Use Temperature: 2350°F (1288°C) / Cone 10
• Standard Electrical: 240 Volts, 48 Amps, 11,520 Watts, 50/60Hz, Single Phase
  Power Cord Plug Configuration - NEMA 6-50
  Available in 200V, 208V, 220V and 230V by request
  Available in 3 phase Delta and Wye (380V, 400V, 415V) by request
  Operates properly on both 50Hz and 60Hz
  Consult with an electrician for proper fuse panel, service wire size, receptacle, and fusing requirements. This model, used for its intended and expected purpose, would not be defined as "continuous use". Continuous use is defined as continuous, full power on for 3+ hours.
• Weight: 295lb. (134Kg) - Approx.
• Shipping Method: Freight Truck
  NRTL Listing Agency - TUV Listed United States and Canada - Designed and Tested to CSA & U/L 499

Product description and specifications courtesy of Evenheat Kiln, Inc. Specifications subject to change by the manufacturer.

• Made to order in the USA and shipped direct from the manufacturer in Caseville, MI. We confirm current lead time with you when you order.
• Ships by motor freight (LTL truck) — freight is quoted upfront, before you pay for it. Residential liftgate delivery is available.
• Questions? Call (737) 231-1880 or use Get a Quote. Try our Electrical Readiness Checker.
• See our Shipping Policy and Return Policy.