{"title":"X-Large Kilns","description":"\u003cp\u003eHigh-capacity kilns for production studios, schools, and firing large pieces or big loads.\u003c\/p\u003e\u003cp\u003eWe're finalizing our X-large lineup. Use the Kiln Selector to narrow your size and power, then request a quote.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/get-a-quote\"\u003e\u003cstrong\u003eGet a Quote\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e","products":[{"product_id":"jen-ken-af3c-2822-3-electric-kiln","title":"Jen-Ken AF3C 2822 3\" Brick Electric Kiln","description":"\u003cp\u003eThe AF3C 2822 3\" is essentially the 2422 3\" in a larger size, built for low-fire ceramics up to cone 6 and high-fire work up to cone 8 (2,300°F).\u003c\/p\u003e\u003cp\u003eThis reliable, efficient kiln is built for frequent use and multiple firings each week, making it a production kiln rather than a hobbyist one. Its 3\" brick walls and lid provide about 20% more insulation than traditional brick kilns.\u003c\/p\u003e\u003cp\u003eLid lifters are included to reduce effort when opening, and it works with the Orton Downdraft System (sold separately) for even, consistent firing, with zone-control options available.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest for:\u003c\/strong\u003e low- and high-fire ceramics \u0026amp; pottery, cone 6 up to cone 8 (2,300°F)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBigger capacity:\u003c\/strong\u003e 28\" wide with 22\" depth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduction kiln:\u003c\/strong\u003e built for high-volume firing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy access:\u003c\/strong\u003e lower height makes it simple to reach the bottom\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpacious interior:\u003c\/strong\u003e full 21\" shelves or two half shelves\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3\" high-fire brick:\u003c\/strong\u003e about 20% more insulation\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLid lifters included\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVenting \u0026amp; zone control:\u003c\/strong\u003e compatible with the Orton Downdraft System\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrton AutoFire AF3C 3-button digital controller\u003c\/li\u003e\n\u003cli\u003eKiln stand\u003c\/li\u003e\n\u003cli\u003eInstruction manual\u003c\/li\u003e\n\u003cli\u003eLid lifters\u003c\/li\u003e\n\u003cli\u003e2-year limited warranty for kiln and controller\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"kn-spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eAF3C 2822 3\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterior dimensions\u003c\/th\u003e\n\u003ctd\u003e28\" x 22\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e8 cu ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eElement placement\u003c\/th\u003e\n\u003ctd\u003eSide-fired\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003e2,300°F (cone 8)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e240V, single phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAmperage\u003c\/th\u003e\n\u003ctd\u003e45A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003ctd\u003e10,800W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReceptacle\u003c\/th\u003e\n\u003ctd\u003e6-50R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBreaker\u003c\/th\u003e\n\u003ctd\u003e60A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCircuit wire gauge\u003c\/th\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKiln weight\u003c\/th\u003e\n\u003ctd\u003e300 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping weight (avg.)\u003c\/th\u003e\n\u003ctd\u003e353 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping dimensions\u003c\/th\u003e\n\u003ctd\u003e54\" x 45\" x 43\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eController\u003c\/th\u003e\n\u003ctd\u003eOrton AutoFire AF3C 3-button\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping method\u003c\/th\u003e\n\u003ctd\u003eMotor freight — quoted upfront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShelf size\u003c\/th\u003e\n\u003ctd\u003eFull 21\" shelves or two half shelves\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrick thickness\u003c\/th\u003e\n\u003ctd\u003e3\" brick walls and lid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoading type\u003c\/th\u003e\n\u003ctd\u003eTop-loading (lid with lid lifters)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eElectrical requirements\u003c\/h3\u003e\u003cp\u003e240V single-phase, 45A draw, 10,800W. Requires a 60A breaker, 6-gauge circuit wire and a NEMA 6-50R receptacle. Have a licensed electrician confirm your circuit, breaker and receptacle before the kiln arrives.\u003c\/p\u003e\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003e2-year limited manufacturer warranty covering both the kiln and the controller.\u003c\/p\u003e\u003ch3\u003eShipping, lead time \u0026amp; ordering\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade to order\u003c\/strong\u003e and shipped direct from the manufacturer. We confirm current lead time with you when you order.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips by motor freight (LTL truck)\u003c\/strong\u003e — freight is quoted upfront, before you pay for it. Residential liftgate delivery is available.\u003c\/li\u003e\n\u003cli\u003eNot sure about size, voltage, or your outlet? \u003ca href=\"\/pages\/how-can-we-help\"\u003eTalk to us\u003c\/a\u003e or call (737) 231-1880 before you order, and try our \u003ca href=\"\/pages\/electrical-readiness-checker\"\u003eElectrical Readiness Checker\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e and \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Jen-Ken","offers":[{"title":"Default Title","offer_id":50751553667329,"sku":"JK-AF3C-2822-3","price":3714.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/9773\/6705\/files\/Jen-Ken-Kilns_af_2822-3_closed.jpg?v=1792095170"},{"product_id":"jen-ken-af-2829-3-electric-kiln","title":"Jen-Ken AF 2829 3″ Brick Electric Kiln","description":"\u003cp\u003eThe 2829 3” is tailored for the bustling studio environment; designed to cater primarily to low-fire ceramics up to Cone 8. Standard with a plug-in 45 amp\/240 volt setup, you may choose instead to upgrade to the 55 amp direct wire setup for enhanced power and prolonging element life. Lid lifters (included) significantly reduce lid weight, making it easier to open and close.\u003c\/p\u003e\u003cp\u003eEquipped with the renowned Orton AutoFire 12-Button Controller, it offers an unparalleled level of convenience and precision. With pre-programmed cone firing schedules and nine user-customizable programs, this kiln seamlessly adapts to your unique firing needs.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterior:\u003c\/strong\u003e 28\" x 29\" (10.33 cu ft)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax temperature:\u003c\/strong\u003e 2,300°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e Orton AutoFire 12-Key Controller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3\" brick:\u003c\/strong\u003e about 20% more insulation than standard brick\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrton AutoFire 12-Key Controller\u003c\/li\u003e\n\u003cli\u003eKiln Stand\u003c\/li\u003e\n\u003cli\u003eInstruction Manual\u003c\/li\u003e\n\u003cli\u003e2-Year Limited Warranty for Kiln and Controller\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"kn-spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eKiln model\u003c\/th\u003e\n\u003ctd\u003eAF 2829-3\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterior dimensions\u003c\/th\u003e\n\u003ctd\u003e28\" x 29\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e10.33 cu ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eElement placement\u003c\/th\u003e\n\u003ctd\u003eSide-fired\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003e2,300°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage (45 Amp option)\u003c\/th\u003e\n\u003ctd\u003e240V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAmperage (45 Amp option)\u003c\/th\u003e\n\u003ctd\u003e45A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWattage (45 Amp option)\u003c\/th\u003e\n\u003ctd\u003e10,800W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReceptacle (45 Amp option)\u003c\/th\u003e\n\u003ctd\u003e6-50R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBreaker (45 Amp option)\u003c\/th\u003e\n\u003ctd\u003e60A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCircuit wire gauge (45 Amp option)\u003c\/th\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage (55 Amp option)\u003c\/th\u003e\n\u003ctd\u003e240V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAmperage (55 Amp option)\u003c\/th\u003e\n\u003ctd\u003e55A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWattage (55 Amp option)\u003c\/th\u003e\n\u003ctd\u003e13,200W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReceptacle (55 Amp option)\u003c\/th\u003e\n\u003ctd\u003eDirect Wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBreaker (55 Amp option)\u003c\/th\u003e\n\u003ctd\u003e70A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCircuit wire gauge (55 Amp option)\u003c\/th\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKiln weight\u003c\/th\u003e\n\u003ctd\u003e300 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping weight (average)\u003c\/th\u003e\n\u003ctd\u003e400 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping dimensions\u003c\/th\u003e\n\u003ctd\u003e54\" x 45\" x 64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eController\u003c\/th\u003e\n\u003ctd\u003eOrton AutoFire 12-Key Controller\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrick thickness\u003c\/th\u003e\n\u003ctd\u003e3\" brick walls and lid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoading type\u003c\/th\u003e\n\u003ctd\u003eTop-loading (lid lifters)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping method\u003c\/th\u003e\n\u003ctd\u003eMotor freight — quoted upfront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiring range\u003c\/th\u003e\n\u003ctd\u003eHigh-fire (cone 8) uses the 55A direct-wire option.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eElectrical requirements\u003c\/h3\u003e\u003cp\u003e240V single-phase, available in two electrical configurations: 45 Amp: 45A draw, 10,800W, breaker 60A, 6-gauge wire, receptacle 6-50R; 55 Amp: 55A draw, 13,200W, breaker 70A, 4-gauge wire, receptacle Direct Wire. The price shown is for the standard configuration; ask us to confirm pricing for the other option. Have a licensed electrician confirm your circuit, breaker and receptacle before the kiln arrives.\u003c\/p\u003e\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003e2-year limited manufacturer warranty covering both the kiln and the controller.\u003c\/p\u003e\u003ch3\u003eShipping, lead time \u0026amp; ordering\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade to order\u003c\/strong\u003e and shipped direct from the manufacturer. We confirm current lead time with you when you order.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips by motor freight (LTL truck)\u003c\/strong\u003e — freight is quoted upfront, before you pay for it. Residential liftgate delivery is available.\u003c\/li\u003e\n\u003cli\u003eNot sure about size, voltage, or your outlet? \u003ca href=\"\/pages\/how-can-we-help\"\u003eTalk to us\u003c\/a\u003e or call (737) 231-1880 before you order, and try our \u003ca href=\"\/pages\/electrical-readiness-checker\"\u003eElectrical Readiness Checker\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e and \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Jen-Ken","offers":[{"title":"Default Title","offer_id":50751844876545,"sku":"JK-2829-3","price":4508.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/9773\/6705\/files\/Jen-Ken-Kilns_af_2829-3_open.jpg?v=1792102363"},{"product_id":"jen-ken-mega-coil-2829-3-electric-kiln","title":"Jen-Ken Mega Coil 2829 3″ Electric Kiln","description":"\u003cp\u003eThe Jen-Ken Mega Coil Kiln Line for pottery and ceramics can do it all! Designed with the busy production studio or artist in mind, these Mega Coil kilns offer unmatched ease of operation and maintenance.\u003c\/p\u003e\u003cp\u003eJen-Ken starts with its traditional 3\" Brick Kiln by adding one super heavy-gauge Mega Coil to each full brick.\u003c\/p\u003e\u003cp\u003eIn just about 10 minutes, you can effortlessly change a coil on your own, keeping your creative process uninterrupted. This design ensures minimal downtime – no waiting for repairmen! Plus, if there's ever a controller issue that can’t be resolved immediately, you can simply package it up and send it back to the Jen-Ken factory for expert servicing.\u003c\/p\u003e\u003cp\u003eEquipped with the renowned Orton AutoFire 12-button controller with 25 blank user programs as standard, precise temperature control ensures optimal firing conditions for every project. With the option to upgrade to the AutoFire Slide or the TAP II Touchscreen Controller, you’ll gain even more features and ease of programming. Solid-state relays included.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterior:\u003c\/strong\u003e 28\" x 29\" (10.33 cu ft)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax temperature:\u003c\/strong\u003e 2,300°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e Orton AutoFire 12-Key Controller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3\" brick:\u003c\/strong\u003e about 20% more insulation than standard brick\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrton AutoFire 12-Key Controller\u003c\/li\u003e\n\u003cli\u003eLid Lifter\u003c\/li\u003e\n\u003cli\u003eKiln Stand\u003c\/li\u003e\n\u003cli\u003eSolid-State Relays\u003c\/li\u003e\n\u003cli\u003eInstruction Manual\u003c\/li\u003e\n\u003cli\u003e2-Year Limited Warranty for Kiln and Controller\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"kn-spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eKiln model\u003c\/th\u003e\n\u003ctd\u003eAF 2829 3\" LL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterior dimensions\u003c\/th\u003e\n\u003ctd\u003e28\" x 29\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e10.33 cu ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eElement placement\u003c\/th\u003e\n\u003ctd\u003eSide-fired\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003e2,300°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e240V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAmperage\u003c\/th\u003e\n\u003ctd\u003e55A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003ctd\u003e13,200W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReceptacle\u003c\/th\u003e\n\u003ctd\u003e6-50R or Direct Wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBreaker\u003c\/th\u003e\n\u003ctd\u003e70A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCircuit wire gauge\u003c\/th\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKiln weight\u003c\/th\u003e\n\u003ctd\u003e375 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping weight (average)\u003c\/th\u003e\n\u003ctd\u003e425 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eController\u003c\/th\u003e\n\u003ctd\u003eOrton AutoFire 12-Key Controller\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrick thickness\u003c\/th\u003e\n\u003ctd\u003e3\" brick walls and lid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoading type\u003c\/th\u003e\n\u003ctd\u003eTop-loading (lid lifters)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping method\u003c\/th\u003e\n\u003ctd\u003eMotor freight — quoted upfront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eElectrical requirements\u003c\/h3\u003e\u003cp\u003e240V single-phase: 55A draw, 13,200W, breaker 70A, 4-gauge wire, receptacle 6-50R or Direct Wire. Have a licensed electrician confirm your circuit, breaker and receptacle before the kiln arrives.\u003c\/p\u003e\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003e2-year limited manufacturer warranty covering both the kiln and the controller.\u003c\/p\u003e\u003ch3\u003eShipping, lead time \u0026amp; ordering\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade to order\u003c\/strong\u003e and shipped direct from the manufacturer. We confirm current lead time with you when you order.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips by motor freight (LTL truck)\u003c\/strong\u003e — freight is quoted upfront, before you pay for it. Residential liftgate delivery is available.\u003c\/li\u003e\n\u003cli\u003eNot sure about size, voltage, or your outlet? \u003ca href=\"\/pages\/how-can-we-help\"\u003eTalk to us\u003c\/a\u003e or call (737) 231-1880 before you order, and try our \u003ca href=\"\/pages\/electrical-readiness-checker\"\u003eElectrical Readiness Checker\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e and \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Jen-Ken","offers":[{"title":"Default Title","offer_id":50751845040385,"sku":"JK-MEGA-COIL-2829-3-LL","price":4640.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/9773\/6705\/files\/Jen-Ken-Kilns_Mega-Coil_2829-3_SSR_front-open_af4000.png?v=1792102386"},{"product_id":"jen-ken-mega-coil-2822-3-electric-kiln","title":"Jen-Ken Mega Coil 2822 3″ Electric Kiln","description":"\u003cp\u003eThe spacious Mega Coil 2822-3\" kiln, equipped with lid lifters, is designed to meet the needs of mid-range production studios, busy schools, and commercial environments.\u003c\/p\u003e\u003cp\u003eFiring to cone 5-6, this versatile kiln offers minimal maintenance while ensuring consistent, efficient production. Its robust Mega Coil system and easy serviceability make it a smart investment for smooth, long-lasting operation.\u003c\/p\u003e\u003cp\u003eAvailable in a plug-in, low-fire version or a direct-wire version for high-fire work.\u003c\/p\u003e\u003cp\u003eJen-Ken upgraded its traditional 3\" brick kilns with oversized, super-heavy-gauge Mega Coils. The larger coil diameter extends coil lifespan, reducing wear and improving performance.\u003c\/p\u003e\u003cp\u003eDesigned for ease of use, efficiency, and minimal maintenance, these kilns feature high-power elements that are simple to replace, easy-to-access external thermocouples, and durable solid-state (SSR) relays built to withstand consistent use.\u003c\/p\u003e\u003cp\u003eLid lifters (included) offer hassle-free loading and unloading. For enhanced heat efficiency, optional zone control is also available.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest for:\u003c\/strong\u003e Ceramics and Pottery\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCone:\u003c\/strong\u003e Fires up to cone 5-6 Great for Mid-Range Production Studios\/Classrooms : Ideal for high-volume paint-your-own pottery studios, schools, and other environments needing frequent and efficient firings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Mega Coil System:\u003c\/strong\u003e Equipped with oversized, super-heavy-gauge Mega Coils, providing longer lifespan, reduced wear, and improved performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimal Maintenance:\u003c\/strong\u003e Designed for easy serviceability, featuring heavy-gauge high-power mega coils and external thermocouples that are easily accessible for maintenance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid-State Relays:\u003c\/strong\u003e Features durable solid-state (SSR) relays that withstand consistent use, ensuring long-lasting performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHassle-Free Operation:\u003c\/strong\u003e Lid lifters (included) facilitate easy loading and unloading of your work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailable in Multiple Configurations:\u003c\/strong\u003e Choose from a plug-in, low-fire version or a direct-wire version for high-fire applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3\" Brick High-Fire Brick:\u003c\/strong\u003e This kiln body, made of 3” brick, offers 20% more insulation than standard bricks, enhancing energy efficiency and maximizing heat retention during firings.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrton AutoFire 12-Button Controller\u003c\/li\u003e\n\u003cli\u003eLid Lifter\u003c\/li\u003e\n\u003cli\u003eKiln Stand\u003c\/li\u003e\n\u003cli\u003eSolid-State Relays (SSR)\u003c\/li\u003e\n\u003cli\u003eInstruction Manual\u003c\/li\u003e\n\u003cli\u003e2-Year Limited Warranty for Kiln and Controller\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"kn-spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eKiln model\u003c\/th\u003e\n\u003ctd\u003eAF 2822 Mega Coil 3\" LL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterior dimensions\u003c\/th\u003e\n\u003ctd\u003e28\" x 22\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e8 cu ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eElement placement\u003c\/th\u003e\n\u003ctd\u003eSide-fired\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003e2,300°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e240V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAmperage\u003c\/th\u003e\n\u003ctd\u003e42A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003ctd\u003e10,080W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReceptacle\u003c\/th\u003e\n\u003ctd\u003e6-50R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBreaker\u003c\/th\u003e\n\u003ctd\u003e60A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKiln weight\u003c\/th\u003e\n\u003ctd\u003e300 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping weight (average)\u003c\/th\u003e\n\u003ctd\u003e355 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eController\u003c\/th\u003e\n\u003ctd\u003eOrton AutoFire 12-Button Controller\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrick thickness\u003c\/th\u003e\n\u003ctd\u003e3\" brick walls and lid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoading type\u003c\/th\u003e\n\u003ctd\u003eTop-loading (lid lifters)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping method\u003c\/th\u003e\n\u003ctd\u003eMotor freight — quoted upfront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eElectrical requirements\u003c\/h3\u003e\u003cp\u003e240V single-phase: 42A draw, 10,080W, breaker 60A, receptacle 6-50R. Confirm the circuit wire gauge with us before installation.\u003c\/p\u003e\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003e2-year limited manufacturer warranty covering both the kiln and the controller.\u003c\/p\u003e\u003ch3\u003eShipping, lead time \u0026amp; ordering\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade to order\u003c\/strong\u003e and shipped direct from the manufacturer. We confirm current lead time with you when you order.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips by motor freight (LTL truck)\u003c\/strong\u003e — freight is quoted upfront, before you pay for it. Residential liftgate delivery is available.\u003c\/li\u003e\n\u003cli\u003eNot sure about size, voltage, or your outlet? \u003ca href=\"\/pages\/how-can-we-help\"\u003eTalk to us\u003c\/a\u003e or call (737) 231-1880 before you order, and try our \u003ca href=\"\/pages\/electrical-readiness-checker\"\u003eElectrical Readiness Checker\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e and \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Jen-Ken","offers":[{"title":"Default Title","offer_id":50751845236993,"sku":"JK-MEGA-COIL-2822-3-LL","price":3961.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/9773\/6705\/files\/Jen-Ken-Kilns_af_mega-coil_2822-3_LL_open.jpg?v=1792102396"},{"product_id":"jen-ken-oval-27-3-electric-kiln","title":"Jen-Ken Oval 27 3″ Brick Electric Kiln","description":"\u003cp\u003eOffering the space of two kilns in one, it's ideal for schools, paint-your-own pottery studios, and commercial environments that need to fire large volumes.\u003c\/p\u003e\u003cp\u003eLid lifters (included) significantly reduce lid weight, making it easier to open and close.\u003c\/p\u003e\u003cp\u003eFor optimal low-fire performance, choose the 55A direct-wire version.\u003c\/p\u003e\u003cp\u003eThe 65A direct-wire version is required for cone 5-6 high-fire firings.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest for:\u003c\/strong\u003e Low-fire ceramics; designed for firings up to cone 04–06\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGreat for Mid-Range Production Studios\/Classrooms:\u003c\/strong\u003e Ideal for high-volume paint-your-own pottery studios, schools, and other environments needing frequent and efficient firings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh capacity:\u003c\/strong\u003e Massive interior space—it's like two kilns in one!\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3\" Brick High-Fire Brick:\u003c\/strong\u003e This kiln body, made of 3” brick offers 20% more insulation than standard bricks, enhancing energy efficiency and maximizing heat retention during firings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLid Lifters Included:\u003c\/strong\u003e Lid lifters significantly reduce the weight of the lid, making it easier to open and close.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCone 5-6 Upgrade:\u003c\/strong\u003e For firings up to cone 5-6, a 65A DW upgrade is available\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrton AF3P 3-Button Controller\u003c\/li\u003e\n\u003cli\u003eKiln Stand\u003c\/li\u003e\n\u003cli\u003eInstruction Manual\u003c\/li\u003e\n\u003cli\u003e2-Year Limited Warranty for Kiln and Controller\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"kn-spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eKiln model\u003c\/th\u003e\n\u003ctd\u003eAF Oval 27\" 3\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterior dimensions\u003c\/th\u003e\n\u003ctd\u003e39\" x 24\" x 27\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e14 cu ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eElement placement\u003c\/th\u003e\n\u003ctd\u003eSide-fired\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003e2,250°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e240V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAmperage\u003c\/th\u003e\n\u003ctd\u003e55A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003ctd\u003e13,200W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReceptacle\u003c\/th\u003e\n\u003ctd\u003eDirect Wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBreaker\u003c\/th\u003e\n\u003ctd\u003e70A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCircuit wire gauge\u003c\/th\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKiln weight\u003c\/th\u003e\n\u003ctd\u003e425 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping weight (average)\u003c\/th\u003e\n\u003ctd\u003e500 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eController\u003c\/th\u003e\n\u003ctd\u003eOrton AF3P 3-Button Controller\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrick thickness\u003c\/th\u003e\n\u003ctd\u003e3\" brick walls and lid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoading type\u003c\/th\u003e\n\u003ctd\u003eTop-loading (lid lifters)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping method\u003c\/th\u003e\n\u003ctd\u003eMotor freight — quoted upfront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiring range\u003c\/th\u003e\n\u003ctd\u003eLow-fire (cone 04–06) on the 55A direct-wire version; cone 5–6 requires the 65A direct-wire version (ask us).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eElectrical requirements\u003c\/h3\u003e\u003cp\u003e240V single-phase: 55A draw, 13,200W, breaker 70A, 4-gauge wire, receptacle Direct Wire. Have a licensed electrician confirm your circuit, breaker and receptacle before the kiln arrives.\u003c\/p\u003e\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003e2-year limited manufacturer warranty covering both the kiln and the controller.\u003c\/p\u003e\u003ch3\u003eShipping, lead time \u0026amp; ordering\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade to order\u003c\/strong\u003e and shipped direct from the manufacturer. We confirm current lead time with you when you order.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips by motor freight (LTL truck)\u003c\/strong\u003e — freight is quoted upfront, before you pay for it. Residential liftgate delivery is available.\u003c\/li\u003e\n\u003cli\u003eNot sure about size, voltage, or your outlet? \u003ca href=\"\/pages\/how-can-we-help\"\u003eTalk to us\u003c\/a\u003e or call (737) 231-1880 before you order, and try our \u003ca href=\"\/pages\/electrical-readiness-checker\"\u003eElectrical Readiness Checker\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e and \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Jen-Ken","offers":[{"title":"Default Title","offer_id":50751845433601,"sku":"JK-OVAL-27-3-LL","price":5414.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/9773\/6705\/files\/jen-ken-kilns_oval-27_closed-front.jpg?v=1792102428"},{"product_id":"jen-ken-jk2-22-electric-kiln","title":"Jen-Ken JK² 22″ Electric Kiln","description":"\u003cp\u003eIts large square shape maximizes space, offering ample room for sizable projects while maintaining easy access for efficient loading and unloading. Lid lifters are included for easy opening and closing.\u003c\/p\u003e\u003cp\u003eWhile it has a maximum temperature of 2300°F, this kiln excels at low-fire pottery. However, it's not ideal for frequent high-fire firings, as it struggles to reach cone 5 quickly under standard conditions.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest for:\u003c\/strong\u003e Low-fire ceramics; designed for firings up to cone 04–06\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpacious Square Design:\u003c\/strong\u003e Provides ample room for large projects while allowing for easy loading and unloading.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIdeal for Oversized Low-Fire Pieces:\u003c\/strong\u003e Perfect for firing yard ornaments, Christmas trees, and slip-cast creations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2300°F Maximum Temperature:\u003c\/strong\u003e Capable of reaching cone 5, but optimized for low-fire pottery.|\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLid Lifters:\u003c\/strong\u003e Lid lifters are include for easy opening and closing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e Not Ideal for Frequent High-Fire Firings: Takes longer to reach higher temperatures under standard conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrton AutoFire AF3C 3-Button Controller\u003c\/li\u003e\n\u003cli\u003eKiln Stand\u003c\/li\u003e\n\u003cli\u003eInstruction Manual\u003c\/li\u003e\n\u003cli\u003e2-Year Limited Warranty for Kiln and Controller\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"kn-spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eKiln model\u003c\/th\u003e\n\u003ctd\u003eJK² 22\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterior dimensions\u003c\/th\u003e\n\u003ctd\u003e27\" x 27\" x 22\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e9 cu ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eElement placement\u003c\/th\u003e\n\u003ctd\u003eSide-fired\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003e2,300°F (designed for low-fire, cone 04–06)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e240V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAmperage\u003c\/th\u003e\n\u003ctd\u003e45A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003ctd\u003e10,800W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReceptacle\u003c\/th\u003e\n\u003ctd\u003e6-50R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKiln weight\u003c\/th\u003e\n\u003ctd\u003e225 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping weight (average)\u003c\/th\u003e\n\u003ctd\u003e435 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping dimensions\u003c\/th\u003e\n\u003ctd\u003e54\" x 45\" x 46\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eController\u003c\/th\u003e\n\u003ctd\u003eOrton AutoFire AF3C 3-Button Controller\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrick thickness\u003c\/th\u003e\n\u003ctd\u003eStandard brick\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoading type\u003c\/th\u003e\n\u003ctd\u003eTop-loading (lid lifters)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping method\u003c\/th\u003e\n\u003ctd\u003eMotor freight — quoted upfront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eElectrical requirements\u003c\/h3\u003e\u003cp\u003e240V single-phase: 45A draw, 10,800W, receptacle 6-50R. Confirm the breaker, circuit wire gauge with us before installation. Have a licensed electrician confirm your circuit, breaker and receptacle before the kiln arrives.\u003c\/p\u003e\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003e2-year limited manufacturer warranty covering both the kiln and the controller.\u003c\/p\u003e\u003ch3\u003eShipping, lead time \u0026amp; ordering\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade to order\u003c\/strong\u003e and shipped direct from the manufacturer. We confirm current lead time with you when you order.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips by motor freight (LTL truck)\u003c\/strong\u003e — freight is quoted upfront, before you pay for it. Residential liftgate delivery is available.\u003c\/li\u003e\n\u003cli\u003eNot sure about size, voltage, or your outlet? \u003ca href=\"\/pages\/how-can-we-help\"\u003eTalk to us\u003c\/a\u003e or call (737) 231-1880 before you order, and try our \u003ca href=\"\/pages\/electrical-readiness-checker\"\u003eElectrical Readiness Checker\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e and \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Jen-Ken","offers":[{"title":"Default Title","offer_id":50751845597441,"sku":"JK-JK2-22","price":3738.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/9773\/6705\/files\/Jen-Ken-Kilns_af_jk2-22_open.jpg?v=1792102447"},{"product_id":"jen-ken-jk2-29-electric-kiln","title":"Jen-Ken JK² 29″ Electric Kiln","description":"\u003cp\u003eIts large square shape maximizes space, offering ample room for sizable projects while maintaining easy access for efficient loading and unloading. Lid lifters (included) significantly reduce lid weight, making it easier to open and close.\u003c\/p\u003e\u003cp\u003eWhile it has a maximum temperature of 2250°F, this kiln excels at low-fire pottery. However, it's not ideal for frequent high-fire firings, as it struggles to reach cone 5 quickly under standard conditions.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest for:\u003c\/strong\u003e Glass fusing and slumping\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnique Square Design:\u003c\/strong\u003e Large, square-shaped kiln body accommodates pieces of virtually all sizes, offering maximum versatility. Spacious for Large Ceramics : Designed for low-fire ceramics, perfect for large pieces like yard ornaments, Christmas trees, and slip-cast creations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmple Firing Space:\u003c\/strong\u003e Designed to easily accommodate larger pieces, making it ideal for a wide range of glass art projects.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccommodates Taller Molds:\u003c\/strong\u003e Perfect for taller draping molds, offering greater flexibility for more complex creations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLid Lifters:\u003c\/strong\u003e Lid lifters (included) significantly reduce lid weight, making it easier to open and close.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExpandable Size Option:\u003c\/strong\u003e Upgrade to the (JK)² 15\" Glass Kiln with 27\" x 27\" x 15\" interior—perfect for firing deeper projects, including functional pieces like sinks. (Select the \"Make it DEEP- 15 Depth\" option above when ordering).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOrton AutoFire 3-Button Controller\u003c\/li\u003e\n\u003cli\u003eKiln Stand\u003c\/li\u003e\n\u003cli\u003eInstruction Manual\u003c\/li\u003e\n\u003cli\u003e2-Year Limited Warranty for Kiln and Controller\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"kn-spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eKiln model\u003c\/th\u003e\n\u003ctd\u003eAF JK² 29\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterior dimensions\u003c\/th\u003e\n\u003ctd\u003e27\" x 27\" x 29\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e11.4 cu ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eElement placement\u003c\/th\u003e\n\u003ctd\u003eSide-fired\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003e2,250°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e240V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAmperage\u003c\/th\u003e\n\u003ctd\u003e45A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003ctd\u003e10,800W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReceptacle\u003c\/th\u003e\n\u003ctd\u003e6-50R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBreaker\u003c\/th\u003e\n\u003ctd\u003e60A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCircuit wire gauge\u003c\/th\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage (55A direct-wire option)\u003c\/th\u003e\n\u003ctd\u003e240V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAmperage (55A direct-wire option)\u003c\/th\u003e\n\u003ctd\u003e55A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWattage (55A direct-wire option)\u003c\/th\u003e\n\u003ctd\u003e13,200W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReceptacle (55A direct-wire option)\u003c\/th\u003e\n\u003ctd\u003eDirect wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBreaker (55A direct-wire option)\u003c\/th\u003e\n\u003ctd\u003e70A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCircuit wire gauge (55A direct-wire option)\u003c\/th\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall dimensions (footprint and height)\u003c\/th\u003e\n\u003ctd\u003e36\" x 46\" x 39\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKiln weight\u003c\/th\u003e\n\u003ctd\u003e250 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping weight (average)\u003c\/th\u003e\n\u003ctd\u003e375 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping dimensions\u003c\/th\u003e\n\u003ctd\u003e54\" x 45\" x 50\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eController\u003c\/th\u003e\n\u003ctd\u003eOrton AutoFire 3-Button Controller\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrick thickness\u003c\/th\u003e\n\u003ctd\u003eStandard brick\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoading type\u003c\/th\u003e\n\u003ctd\u003eTop-loading (lid lifters)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping method\u003c\/th\u003e\n\u003ctd\u003eMotor freight — quoted upfront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eElectrical requirements\u003c\/h3\u003e\u003cp\u003e240V single-phase, available in two electrical configurations: Standard: 45A draw, 10,800W, breaker 60A, 6-gauge wire, receptacle 6-50R; 55A direct-wire: 55A draw, 13,200W, breaker 70A, 4-gauge wire, receptacle Direct wire. The price shown is for the standard configuration; ask us to confirm pricing for the other option. Have a licensed electrician confirm your circuit, breaker and receptacle before the kiln arrives.\u003c\/p\u003e\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003e2-year limited manufacturer warranty covering both the kiln and the controller.\u003c\/p\u003e\u003ch3\u003eShipping, lead time \u0026amp; ordering\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade to order\u003c\/strong\u003e and shipped direct from the manufacturer. We confirm current lead time with you when you order.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips by motor freight (LTL truck)\u003c\/strong\u003e — freight is quoted upfront, before you pay for it. Residential liftgate delivery is available.\u003c\/li\u003e\n\u003cli\u003eNot sure about size, voltage, or your outlet? \u003ca href=\"\/pages\/how-can-we-help\"\u003eTalk to us\u003c\/a\u003e or call (737) 231-1880 before you order, and try our \u003ca href=\"\/pages\/electrical-readiness-checker\"\u003eElectrical Readiness Checker\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e and \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Jen-Ken","offers":[{"title":"Default Title","offer_id":50751845695745,"sku":"JK-JK2-29","price":4281.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/9773\/6705\/files\/Jen-Ken-Kilns_af_jk2-29_closed.jpg?v=1792102457"},{"product_id":"olympic-2823he-electric-kiln","title":"Olympic 2823HE Electric Kiln","description":"\u003cp\u003eA 28\"-wide Olympic stackable electric kiln for serious studio and production work, built with Olympic's heat-shielded electrical box and balanced heating elements for even firing.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFires to Cone 10 \/ 2350°F\u003c\/strong\u003e — cone 10 stoneware and porcelain\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChamber:\u003c\/strong\u003e 28.25 x 22.5 in, 8.34 cu ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e Bartlett KilnStar digital controller; upgrade to the Genesis touchscreen for more programs, delay start, preheat, cone offset and skip step\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel jacket\u003c\/strong\u003e and pilot light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3\" brick\u003c\/strong\u003e for better insulation and heat retention\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStackable sections\u003c\/strong\u003e with Olympic's heat-shielded electrical box; optional lid-lift assist\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOlympic 2823HE kiln\u003c\/li\u003e\n\u003cli\u003eMetal stand\u003c\/li\u003e\n\u003cli\u003eBartlett KilnStar digital controller\u003c\/li\u003e\n\u003cli\u003ePilot light\u003c\/li\u003e\n\u003cli\u003eFurniture kit, vent and other accessories sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"kn-spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eKiln model\u003c\/th\u003e\n\u003ctd\u003e2823HE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eOlympic 28\" Stackable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInside dimensions (in)\u003c\/th\u003e\n\u003ctd\u003e28.25 x 22.5 (width x height)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e8.34 cu ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside dimensions with stand\/frame (in)\u003c\/th\u003e\n\u003ctd\u003e42 x 53 x 42.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003eCone 10 \/ 2350°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoading type\u003c\/th\u003e\n\u003ctd\u003eTop-loading\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrick thickness\u003c\/th\u003e\n\u003ctd\u003e3\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e240V or 208V, single-phase (3-phase available)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAmperage\u003c\/th\u003e\n\u003ctd\u003e48A at 240V \/ 55A at 208V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e3-phase amperage\u003c\/th\u003e\n\u003ctd\u003e32A at 240V \/ 36A at 208V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003ctd\u003e11,520W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePlug \/ connection\u003c\/th\u003e\n\u003ctd\u003eNEMA 6-50 \/ Direct wired\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBreaker (Olympic spec)\u003c\/th\u003e\n\u003ctd\u003e60\/70A (240V\/208V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCopper wire size\u003c\/th\u003e\n\u003ctd\u003e#6, #4 if circuit longer than 40 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eController\u003c\/th\u003e\n\u003ctd\u003eBartlett KilnStar digital (Genesis touchscreen upgrade available)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEst. shipping weight\u003c\/th\u003e\n\u003ctd\u003e385 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping method\u003c\/th\u003e\n\u003ctd\u003eMotor freight (LTL truck) — quoted upfront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eElectrical requirements\u003c\/h3\u003e\u003cp\u003e240V or 208V single-phase: 48A at 240V \/ 55A at 208V, 11,520W, NEMA 6-50 \/ Direct wired. Olympic specifies a 60\/70A breaker (240V\/208V) and #6, #4 if circuit longer than 40 ft copper wire. Also available wired 3-phase (32\/36A, 40\/50A breaker). Rule of thumb: a breaker of about 125% of the kiln's draw — roughly 70A for this model at its highest-amperage voltage. Always confirm the breaker, wire and receptacle with your electrician.\u003c\/p\u003e\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003e1-year limited manufacturer warranty (Olympic warranty for cone 10 kilns). Elements, thermocouple and kiln furniture are not covered. Contact us for the full warranty terms.\u003c\/p\u003e\u003ch3\u003eShipping, lead time \u0026amp; ordering\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade to order\u003c\/strong\u003e in the USA and shipped direct from the manufacturer in Flowery Branch, GA. We confirm current lead time with you when you order.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips by motor freight (LTL truck)\u003c\/strong\u003e — freight is quoted upfront, before you pay for it. Residential liftgate delivery is available.\u003c\/li\u003e\n\u003cli\u003eQuestions? Call (737) 231-1880 or use \u003ca href=\"\/pages\/how-can-we-help\"\u003eGet a Quote\u003c\/a\u003e. Try our \u003ca href=\"\/pages\/electrical-readiness-checker\"\u003eElectrical Readiness Checker\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e and \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Olympic Kilns","offers":[{"title":"Default Title","offer_id":50767508373761,"sku":"OLY-2823HE","price":3989.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/9773\/6705\/files\/olympic-2823he_1.jpg?v=1792192085"},{"product_id":"olympic-2827he-electric-kiln","title":"Olympic 2827HE Electric Kiln","description":"\u003cp\u003eA 28\"-wide Olympic stackable electric kiln for serious studio and production work, built with Olympic's heat-shielded electrical box and balanced heating elements for even firing.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFires to Cone 10 \/ 2350°F\u003c\/strong\u003e — cone 10 stoneware and porcelain\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChamber:\u003c\/strong\u003e 28.25 x 27 in, 10 cu ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e Bartlett KilnStar digital controller; upgrade to the Genesis touchscreen for more programs, delay start, preheat, cone offset and skip step\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel jacket\u003c\/strong\u003e and pilot light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3\" brick\u003c\/strong\u003e for better insulation and heat retention\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStackable sections\u003c\/strong\u003e with Olympic's heat-shielded electrical box; optional lid-lift assist\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOlympic 2827HE kiln\u003c\/li\u003e\n\u003cli\u003eMetal stand\u003c\/li\u003e\n\u003cli\u003eBartlett KilnStar digital controller\u003c\/li\u003e\n\u003cli\u003ePilot light\u003c\/li\u003e\n\u003cli\u003eFurniture kit, vent and other accessories sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"kn-spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eKiln model\u003c\/th\u003e\n\u003ctd\u003e2827HE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eOlympic 28\" Stackable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInside dimensions (in)\u003c\/th\u003e\n\u003ctd\u003e28.25 x 27 (width x height)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e10 cu ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside dimensions with stand\/frame (in)\u003c\/th\u003e\n\u003ctd\u003e42 x 53 x 47\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003eCone 10 \/ 2350°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoading type\u003c\/th\u003e\n\u003ctd\u003eTop-loading\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrick thickness\u003c\/th\u003e\n\u003ctd\u003e3\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e240V or 208V, single-phase (3-phase available)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAmperage\u003c\/th\u003e\n\u003ctd\u003e56A at 240V \/ 64A at 208V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e3-phase amperage\u003c\/th\u003e\n\u003ctd\u003e37A at 240V \/ 43A at 208V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003ctd\u003e13,440W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePlug \/ connection\u003c\/th\u003e\n\u003ctd\u003eDirect wired\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBreaker (Olympic spec)\u003c\/th\u003e\n\u003ctd\u003e70\/80A (240V\/208V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCopper wire size\u003c\/th\u003e\n\u003ctd\u003e#4, #2 if circuit longer than 40 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eController\u003c\/th\u003e\n\u003ctd\u003eBartlett KilnStar digital (Genesis touchscreen upgrade available)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEst. shipping weight\u003c\/th\u003e\n\u003ctd\u003e410 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping method\u003c\/th\u003e\n\u003ctd\u003eMotor freight (LTL truck) — quoted upfront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eElectrical requirements\u003c\/h3\u003e\u003cp\u003e240V or 208V single-phase: 56A at 240V \/ 64A at 208V, 13,440W, Direct wired. Olympic specifies a 70\/80A breaker (240V\/208V) and #4, #2 if circuit longer than 40 ft copper wire. Also available wired 3-phase (37\/43A, 50\/60A breaker). Rule of thumb: a breaker of about 125% of the kiln's draw — roughly 80A for this model at its highest-amperage voltage. Always confirm the breaker, wire and receptacle with your electrician.\u003c\/p\u003e\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003e1-year limited manufacturer warranty (Olympic warranty for cone 10 kilns). Elements, thermocouple and kiln furniture are not covered. Contact us for the full warranty terms.\u003c\/p\u003e\u003ch3\u003eShipping, lead time \u0026amp; ordering\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade to order\u003c\/strong\u003e in the USA and shipped direct from the manufacturer in Flowery Branch, GA. We confirm current lead time with you when you order.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips by motor freight (LTL truck)\u003c\/strong\u003e — freight is quoted upfront, before you pay for it. Residential liftgate delivery is available.\u003c\/li\u003e\n\u003cli\u003eQuestions? Call (737) 231-1880 or use \u003ca href=\"\/pages\/how-can-we-help\"\u003eGet a Quote\u003c\/a\u003e. Try our \u003ca href=\"\/pages\/electrical-readiness-checker\"\u003eElectrical Readiness Checker\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e and \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Olympic Kilns","offers":[{"title":"Default Title","offer_id":50767508504833,"sku":"OLY-2827HE","price":4439.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/9773\/6705\/files\/olympic-2827he_1.jpg?v=1792192087"},{"product_id":"olympic-2523he-electric-kiln","title":"Olympic 2523HE Electric Kiln","description":"\u003cp\u003eAn Olympic oval electric kiln with 3\" brick: the elongated chamber fits long platters and more half shelves per layer than a round kiln of similar width.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFires to Cone 10 \/ 2350°F\u003c\/strong\u003e — cone 10 stoneware and porcelain\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChamber:\u003c\/strong\u003e 37 x 25 x 24.5 in, 10 cu ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e Bartlett KilnStar digital controller; upgrade to the Genesis touchscreen for more programs, delay start, preheat, cone offset and skip step\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel jacket\u003c\/strong\u003e and pilot light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3\" brick\u003c\/strong\u003e for better insulation and heat retention\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStackable sections\u003c\/strong\u003e with Olympic's heat-shielded electrical box; optional lid-lift assist\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOlympic 2523HE kiln\u003c\/li\u003e\n\u003cli\u003eMetal stand\u003c\/li\u003e\n\u003cli\u003eBartlett KilnStar digital controller\u003c\/li\u003e\n\u003cli\u003ePilot light\u003c\/li\u003e\n\u003cli\u003eFurniture kit, vent and other accessories sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"kn-spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eKiln model\u003c\/th\u003e\n\u003ctd\u003e2523HE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eOlympic Oval\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInside dimensions (in)\u003c\/th\u003e\n\u003ctd\u003e37 x 25 x 24.5 (w x d x h)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e10 cu ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside dimensions with stand\/frame (in)\u003c\/th\u003e\n\u003ctd\u003e50 x 45 x 44.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003eCone 10 \/ 2350°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoading type\u003c\/th\u003e\n\u003ctd\u003eTop-loading\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrick thickness\u003c\/th\u003e\n\u003ctd\u003e3\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e240V or 208V, single-phase (3-phase available)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAmperage\u003c\/th\u003e\n\u003ctd\u003e48A at 240V \/ 55A at 208V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e3-phase amperage\u003c\/th\u003e\n\u003ctd\u003e32A at 240V \/ 36A at 208V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003ctd\u003e11,520W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePlug \/ connection\u003c\/th\u003e\n\u003ctd\u003eNEMA 6-50 \/ Direct wired\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBreaker (Olympic spec)\u003c\/th\u003e\n\u003ctd\u003e60\/70A (240V\/208V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCopper wire size\u003c\/th\u003e\n\u003ctd\u003e#6, #4 if circuit longer than 40 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eController\u003c\/th\u003e\n\u003ctd\u003eBartlett KilnStar digital (Genesis touchscreen upgrade available)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEst. shipping weight\u003c\/th\u003e\n\u003ctd\u003e515 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping method\u003c\/th\u003e\n\u003ctd\u003eMotor freight (LTL truck) — quoted upfront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eElectrical requirements\u003c\/h3\u003e\u003cp\u003e240V or 208V single-phase: 48A at 240V \/ 55A at 208V, 11,520W, NEMA 6-50 \/ Direct wired. Olympic specifies a 60\/70A breaker (240V\/208V) and #6, #4 if circuit longer than 40 ft copper wire. Also available wired 3-phase (32\/36A, 40\/50A breaker). Rule of thumb: a breaker of about 125% of the kiln's draw — roughly 70A for this model at its highest-amperage voltage. Always confirm the breaker, wire and receptacle with your electrician.\u003c\/p\u003e\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003e1-year limited manufacturer warranty (Olympic warranty for cone 10 kilns). Elements, thermocouple and kiln furniture are not covered. Contact us for the full warranty terms.\u003c\/p\u003e\u003ch3\u003eShipping, lead time \u0026amp; ordering\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade to order\u003c\/strong\u003e in the USA and shipped direct from the manufacturer in Flowery Branch, GA. We confirm current lead time with you when you order.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips by motor freight (LTL truck)\u003c\/strong\u003e — freight is quoted upfront, before you pay for it. Residential liftgate delivery is available.\u003c\/li\u003e\n\u003cli\u003eQuestions? Call (737) 231-1880 or use \u003ca href=\"\/pages\/how-can-we-help\"\u003eGet a Quote\u003c\/a\u003e. Try our \u003ca href=\"\/pages\/electrical-readiness-checker\"\u003eElectrical Readiness Checker\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e and \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Olympic Kilns","offers":[{"title":"Default Title","offer_id":50767508701441,"sku":"OLY-2523HE","price":4759.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/9773\/6705\/files\/olympic-2523he_1.jpg?v=1792192089"},{"product_id":"olympic-3023he-electric-kiln","title":"Olympic 3023HE Electric Kiln","description":"\u003cp\u003eAn Olympic oval electric kiln with 3\" brick: the elongated chamber fits long platters and more half shelves per layer than a round kiln of similar width.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFires to Cone 10 \/ 2350°F\u003c\/strong\u003e — cone 10 stoneware and porcelain\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChamber:\u003c\/strong\u003e 42 x 30 x 24.5 in, 14.9 cu ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e Bartlett KilnStar digital controller; upgrade to the Genesis touchscreen for more programs, delay start, preheat, cone offset and skip step\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel jacket\u003c\/strong\u003e and pilot light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3\" brick\u003c\/strong\u003e for better insulation and heat retention\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStackable sections\u003c\/strong\u003e with Olympic's heat-shielded electrical box; optional lid-lift assist\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOlympic 3023HE kiln\u003c\/li\u003e\n\u003cli\u003eMetal stand\u003c\/li\u003e\n\u003cli\u003eBartlett KilnStar digital controller\u003c\/li\u003e\n\u003cli\u003ePilot light\u003c\/li\u003e\n\u003cli\u003eFurniture kit, vent and other accessories sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"kn-spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eKiln model\u003c\/th\u003e\n\u003ctd\u003e3023HE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eOlympic Oval\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInside dimensions (in)\u003c\/th\u003e\n\u003ctd\u003e42 x 30 x 24.5 (w x d x h)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e14.9 cu ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside dimensions with stand\/frame (in)\u003c\/th\u003e\n\u003ctd\u003e55 x 53 x 44.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003eCone 10 \/ 2350°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoading type\u003c\/th\u003e\n\u003ctd\u003eTop-loading\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrick thickness\u003c\/th\u003e\n\u003ctd\u003e3\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e240V or 208V, single-phase (3-phase available)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAmperage\u003c\/th\u003e\n\u003ctd\u003e70A at 240V \/ 80A at 208V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e3-phase amperage\u003c\/th\u003e\n\u003ctd\u003e46A at 240V \/ 54A at 208V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003ctd\u003e16,800W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePlug \/ connection\u003c\/th\u003e\n\u003ctd\u003eDirect wired\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBreaker (Olympic spec)\u003c\/th\u003e\n\u003ctd\u003e90\/100A (240V\/208V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCopper wire size\u003c\/th\u003e\n\u003ctd\u003e#4, #2 if circuit longer than 40 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eController\u003c\/th\u003e\n\u003ctd\u003eBartlett KilnStar digital (Genesis touchscreen upgrade available)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEst. shipping weight\u003c\/th\u003e\n\u003ctd\u003e595 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping method\u003c\/th\u003e\n\u003ctd\u003eMotor freight (LTL truck) — quoted upfront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eElectrical requirements\u003c\/h3\u003e\u003cp\u003e240V or 208V single-phase: 70A at 240V \/ 80A at 208V, 16,800W, Direct wired. Olympic specifies a 90\/100A breaker (240V\/208V) and #4, #2 if circuit longer than 40 ft copper wire. Also available wired 3-phase (46\/54A, 60\/70A breaker). Rule of thumb: a breaker of about 125% of the kiln's draw — roughly 100A for this model at its highest-amperage voltage. Always confirm the breaker, wire and receptacle with your electrician.\u003c\/p\u003e\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003e1-year limited manufacturer warranty (Olympic warranty for cone 10 kilns). Elements, thermocouple and kiln furniture are not covered. Contact us for the full warranty terms.\u003c\/p\u003e\u003ch3\u003eShipping, lead time \u0026amp; ordering\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade to order\u003c\/strong\u003e in the USA and shipped direct from the manufacturer in Flowery Branch, GA. We confirm current lead time with you when you order.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips by motor freight (LTL truck)\u003c\/strong\u003e — freight is quoted upfront, before you pay for it. Residential liftgate delivery is available.\u003c\/li\u003e\n\u003cli\u003eQuestions? Call (737) 231-1880 or use \u003ca href=\"\/pages\/how-can-we-help\"\u003eGet a Quote\u003c\/a\u003e. Try our \u003ca href=\"\/pages\/electrical-readiness-checker\"\u003eElectrical Readiness Checker\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e and \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Olympic Kilns","offers":[{"title":"Default Title","offer_id":50767508898049,"sku":"OLY-3023HE","price":5679.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/9773\/6705\/files\/olympic-3023he_1.jpg?v=1792192141"},{"product_id":"olympic-dm3023he-electric-kiln","title":"Olympic DM3023HE Electric Kiln","description":"\u003cp\u003eAn Olympic Dual Media kiln with elements in the walls and the lid, so it fires pottery to cone 10 and also handles glass work that benefits from top heat.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFires to Cone 10 \/ 2350°F\u003c\/strong\u003e — cone 10 stoneware and porcelain\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChamber:\u003c\/strong\u003e 42 x 30 x 24.5 in, 14.9 cu ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e Bartlett KilnStar digital controller; upgrade to the Genesis touchscreen for more programs, delay start, preheat, cone offset and skip step\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel jacket\u003c\/strong\u003e and pilot light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3\" brick\u003c\/strong\u003e for better insulation and heat retention\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStackable sections\u003c\/strong\u003e with Olympic's heat-shielded electrical box; optional lid-lift assist\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLid element\u003c\/strong\u003e plus wall elements for top-down heat\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOlympic DM3023HE kiln\u003c\/li\u003e\n\u003cli\u003eMetal stand\u003c\/li\u003e\n\u003cli\u003eBartlett KilnStar digital controller\u003c\/li\u003e\n\u003cli\u003ePilot light\u003c\/li\u003e\n\u003cli\u003eFurniture kit, vent and other accessories sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"kn-spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eKiln model\u003c\/th\u003e\n\u003ctd\u003eDM3023HE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eOlympic Dual Media\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInside dimensions (in)\u003c\/th\u003e\n\u003ctd\u003e42 x 30 x 24.5 (w x d x h)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e14.9 cu ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside dimensions with stand\/frame (in)\u003c\/th\u003e\n\u003ctd\u003e55 x 53 x 44.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003eCone 10 \/ 2350°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoading type\u003c\/th\u003e\n\u003ctd\u003eTop-loading\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrick thickness\u003c\/th\u003e\n\u003ctd\u003e3\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e240V or 208V, single-phase (3-phase available)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAmperage\u003c\/th\u003e\n\u003ctd\u003e78A at 240V \/ 88A at 208V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e3-phase amperage\u003c\/th\u003e\n\u003ctd\u003e52A at 240V \/ 59A at 208V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003ctd\u003e18,720W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePlug \/ connection\u003c\/th\u003e\n\u003ctd\u003eDirect wired\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBreaker (Olympic spec)\u003c\/th\u003e\n\u003ctd\u003e100\/120A (240V\/208V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCopper wire size\u003c\/th\u003e\n\u003ctd\u003e#4, #2 if circuit longer than 40 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eController\u003c\/th\u003e\n\u003ctd\u003eBartlett KilnStar digital (Genesis touchscreen upgrade available)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEst. shipping weight\u003c\/th\u003e\n\u003ctd\u003e595 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping method\u003c\/th\u003e\n\u003ctd\u003eMotor freight (LTL truck) — quoted upfront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eElectrical requirements\u003c\/h3\u003e\u003cp\u003e240V or 208V single-phase: 78A at 240V \/ 88A at 208V, 18,720W, Direct wired. Olympic specifies a 100\/120A breaker (240V\/208V) and #4, #2 if circuit longer than 40 ft copper wire. Also available wired 3-phase (52\/59A, 70\/80A breaker). Rule of thumb: a breaker of about 125% of the kiln's draw — roughly 110A for this model at its highest-amperage voltage. Always confirm the breaker, wire and receptacle with your electrician.\u003c\/p\u003e\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003e1-year limited manufacturer warranty (Olympic warranty for cone 10 kilns). Elements, thermocouple and kiln furniture are not covered. Contact us for the full warranty terms.\u003c\/p\u003e\u003ch3\u003eShipping, lead time \u0026amp; ordering\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade to order\u003c\/strong\u003e in the USA and shipped direct from the manufacturer in Flowery Branch, GA. We confirm current lead time with you when you order.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips by motor freight (LTL truck)\u003c\/strong\u003e — freight is quoted upfront, before you pay for it. Residential liftgate delivery is available.\u003c\/li\u003e\n\u003cli\u003eQuestions? Call (737) 231-1880 or use \u003ca href=\"\/pages\/how-can-we-help\"\u003eGet a Quote\u003c\/a\u003e. Try our \u003ca href=\"\/pages\/electrical-readiness-checker\"\u003eElectrical Readiness Checker\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e and \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Olympic Kilns","offers":[{"title":"Default Title","offer_id":50767509881089,"sku":"OLY-DM3023HE","price":6089.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/9773\/6705\/files\/olympic-dm3023he_1.jpg?v=1792192137"},{"product_id":"evenheat-hf-2927-electric-kiln","title":"Evenheat HF 2927 Electric Kiln","description":"\u003cp\u003eOur largest high-fire design is built for large working studios, production houses and centers of learning. The HF 2927 delivers on size, features and performance.\u003c\/p\u003e\u003cp\u003eThe HF 2927 features our Multi-Zone TAP I, Icon+ and Rampmaster II controls and is standard equipped with our exclusive Swing View Adjustable Viewing which you will absolutely enjoy.\u003c\/p\u003e\u003cp\u003eOrder yours with our Quiet Drive Solid State relay option for tight temperature control and longer element life.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003ch4\u003eTop Load\u003c\/h4\u003e\u003cp\u003eThe HF 2927 is a top loading design and offers a chamber 29\" diameter x 27 deep.\u003c\/p\u003e\u003ch4\u003eLid Lift Assist\u003c\/h4\u003e\u003cp\u003eTo assist in opening and closing we have equipped the HF 2927 with our patented Dyna-Lift lid lift assist.\u003c\/p\u003e\u003cp\u003eThe Dyna-Lift lightens the force needed to operate the kiln lid by attaching and lifting at a single point, the lid handle. The lift assist is not attached to the kiln chamber at all. All heavy lifting forces are directed entirely to the kiln stand and not the kiln itself. It's a wonderful design that places no lifting forces onto the chamber which would only weaken it.\u003c\/p\u003e\u003cp\u003eThe Dyna-Lift Lid Lift Assist is the best designed, best performing lift assist available.\u003c\/p\u003e\u003ch4\u003eMulti-Zone Control\u003c\/h4\u003e\u003cp\u003eThe HF 2927 is designed with multi-zone control. Multi-Zone control means the kiln uses more than one thermocouple (temperature sensor) to control the heat in the firing chamber.\u003c\/p\u003e\u003cp\u003eThe kiln chamber is divided into heat zones, each with its own thermocouple. Each zone temperature is controlled very precisely. The end result is a very even temperature distribution from top to bottom.\u003c\/p\u003e\u003ch4\u003e2 Position Lid Vent\u003c\/h4\u003e\u003cp\u003eThe HF 2927 is equipped with a 2 position lid vent. Perfect for speeding up the cooling process.\u003c\/p\u003e\u003ch4\u003eSwing View Equipped\u003c\/h4\u003e\u003cp\u003eThe HF 2927 temperature controls are fitted to our Swing View Adjustable Enclosure.\u003c\/p\u003e\u003cp\u003eThe swing view is a pivoting, swing-up enclosure that allows you to rotate the control to a comfortable viewing and programming angle. Once you're done, lay it back down to see it from across your studio. It's that simple.\u003c\/p\u003e\u003cp\u003eThe swing view pairs well with touchscreen controls like the TAP I and Icon+ as viewing angle can be perfectly aligned. You'll love it.\u003c\/p\u003e\u003ch4\u003e3\" Firebrick with No Loss of Chamber Volume\u003c\/h4\u003e\u003cp\u003eHistorically kiln designs were based on 2-1\/2\" firebrick. As 3\" firebrick began to show favor in high temperature designs many kiln manufacturers simply reduced the firing chamber size to accommodate the thicker firebrick while leaving the outside dimensions the same.\u003c\/p\u003e\u003cp\u003eAt Evenheat we took a different direction. Instead of making the chamber smaller we kept it the same while increasing the outside dimensions. In this way there is no loss in chamber volume and common, standard kiln furniture would continue to fit. Nice.\u003c\/p\u003e\u003ch4\u003eSwing-Away Peephole Covers\u003c\/h4\u003e\u003cp\u003eOur kiln designs feature swing-away peephole covers as opposed to plugs.\u003c\/p\u003e\u003cp\u003ePlugs get lost and they get broken. Our attached peephole covers remain on the kiln and simply swing open and closed. You won't lose them and they certainly won't break.\u003c\/p\u003e\u003ch4\u003eLid Prop\u003c\/h4\u003e\u003cp\u003eThe HF 2927 is provided with lid prop bars that positively keeps the lid in the open position. Simple operation is made even easier with our well designed lid handle.\u003c\/p\u003e\u003ch4\u003eRelay Access Port\u003c\/h4\u003e\u003cp\u003eThe HF 2927  incorporates our Relay Access Port for simple, no-panel-off relay replacement.\u003c\/p\u003e\u003cp\u003eSimply remove the access plate to gain access to the mechanical relays. There's no need to remove the control panel and dig into the internal wiring. It's absolutely simple and effective and all it takes is a screwdriver!\u003c\/p\u003e\u003cp\u003eIt's a given that mechanical relays will fail at some point. This relay access port really comes in handy when they do.\u003c\/p\u003e\u003ch4\u003eSingle Maintenance Line \u0026amp; Full Jackets\u003c\/h4\u003e\u003cp\u003eOur 27\" deep models feature a \"Maintenance Line\". The Maintenance Line is a split in the jacket between the upper and lower chamber that allows these models to be partially disassembled for ease in element replacement and kiln installation.\u003c\/p\u003e\u003cp\u003eThe upper chamber section is held securely in place through the use of stainless steel plates and screws. Simply remove the screws and separate the sections for maintenance or installation.\u003c\/p\u003e\u003cp\u003eWe do not use buckles to hold the sections together as they tend to loosen and allow shifting during loading, unloading and use.\u003c\/p\u003e\u003ch3\u003eBuild options\u003c\/h3\u003e\u003ch4\u003eMultiple Control Options\u003c\/h4\u003e\u003cp\u003eThe HF 2927 is available in a variety of Multi-Zone controls including the TAP I, Icon+ and Rampmaster II. Multi-Zone controls use multiple thermocouples (temperature sensors) to provide excellent temperature distribution throughout the firing chamber.\u003c\/p\u003e\u003cp\u003eAt Evenheat we take the best control platforms on the market and make them even better by adding Special Limits thermocouples for precise temperature sensing and non-metallic faceplates for stellar Wi-Fi reception for on-line Apps.\u003c\/p\u003e\u003ch4\u003eQuiet Drive Solid State Relay Option\u003c\/h4\u003e\u003cp\u003eThe HF 2927 is available with our Quiet Drive Solid State Relay option.\u003c\/p\u003e\u003cp\u003eOur Quiet Drive Solid State Relay System offers tight temperature control, high reliability and increased heating element life. We fully expect our solid state relay to last the life of the unit. You want this!\u003c\/p\u003e\u003ch4\u003eVoltage Options\u003c\/h4\u003e\u003cp\u003eProduction for the HF 2927 is 240V.\u003c\/p\u003e\u003cp\u003eWe do offer to build in 200V, 208V, 220V, 230V, 380V, 400V and 415V by request.\u003c\/p\u003e\u003cp\u003eAll controls available on the HF 2927 will operate properly on both 50Hz and 60Hz line frequencies. To say it another way, line frequency has no effect. It doesn't matter.\u003c\/p\u003e\u003cp\u003eEvenheat recommends that you check your operating voltage before ordering or placing the kiln in service.\u003c\/p\u003e\u003ch4\u003eVoltage Phase Options\u003c\/h4\u003e\u003cp\u003eThe HF 2927 is available in 3 phase Delta and Wye (380V, 400V and 415V) designs by request.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChamber Dimensions:\u003c\/strong\u003e 29\" Diameter x 27\" Deep - 10.5 Cubic Feet\u003cbr\u003e(73.7cm Diameter x 68.6cm Deep - 297L)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Dimensions:\u003c\/strong\u003e 41\" D x 35\" W x 41\" H (with 8\" stand)\u003cbr\u003e(104cm D x 89 W x 104cm H)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Use Temperature:\u003c\/strong\u003e 2350°F (1288°C) \/ Cone 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Electrical:\u003c\/strong\u003e 240 Volts, 59 Amps, 14,164 Watts, 50\/60Hz, Single Phase\u003cbr\u003eDirect Wired\u003cbr\u003eAvailable in 200V, 208V, 220V and 230V by request\u003cbr\u003eAvailable in 3 phase Delta and Wye (380V, 400V, 415V) by request\u003cbr\u003eOperates properly on both 50Hz and 60Hz\u003cbr\u003eConsult with an electrician for proper fuse panel, service wire size, receptacle, and fusing requirements. This model, used for its intended and expected purpose, would not be defined as \"continuous use\". Continuous use is defined as continuous, full power on for 3+ hours.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 395lb. (180Kg) - Approx.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Method:\u003c\/strong\u003e Freight Truck\u003cbr\u003eNRTL Listing Agency - TUV Listed United States and Canada - Designed and Tested to CSA \u0026amp; U\/L 499\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProduct description and specifications courtesy of Evenheat Kiln, Inc. Specifications subject to change by the manufacturer.\u003c\/p\u003e\u003ch3\u003eShipping, lead time \u0026amp; ordering\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade to order\u003c\/strong\u003e in the USA and shipped direct from the manufacturer in Caseville, MI. We confirm current lead time with you when you order.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips by motor freight (LTL truck)\u003c\/strong\u003e — freight is quoted upfront, before you pay for it. Residential liftgate delivery is available.\u003c\/li\u003e\n\u003cli\u003eQuestions? Call (737) 231-1880 or use \u003ca href=\"\/pages\/how-can-we-help\"\u003eGet a Quote\u003c\/a\u003e. Try our \u003ca href=\"\/pages\/electrical-readiness-checker\"\u003eElectrical Readiness Checker\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e and \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Evenheat","offers":[{"title":"Default Title","offer_id":50916795285761,"sku":null,"price":4968.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/9773\/6705\/files\/1T8GFJvm4zQRaFOPSf6JXiTBtg93rmnpD.jpg?v=1793031188"},{"product_id":"evenheat-rm-2922-electric-kiln","title":"Evenheat RM 2922 Electric Kiln","description":"\u003cp\u003eEasy to load depth and chamber volume come together with the RM 2922. With a chamber rim height of only 33\" and a large diameter of 29\" the RM 2922 means volume firing but without the \"too deep\" feeling. It's perfect for the shorter statured artist as well as those who desire easy loading and unloading.\u003c\/p\u003e\u003cp\u003eThe RM 2922 features our TAP II, Icon+, Icon and Rampmaster II controls and is standard equipped with our exclusive Swing View Adjustable Viewing which you will absolutely enjoy.\u003c\/p\u003e\u003cp\u003eOrder yours with our Quiet Drive Solid State relay option for tight temperature control and longer element life.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003ch4\u003eTop Load\u003c\/h4\u003e\u003cp\u003eThe RM 2922 is a top loading design and offers a chamber 29\" diameter x 22.25\" deep. This puts the rim of the chamber at 33\" which is waist height or lower making it very easy to load.\u003c\/p\u003e\u003ch4\u003eWonderful Lid Handle\u003c\/h4\u003e\u003cp\u003eWe love handles. Handles have to be properly sized and shaped for the job. Our lid handles make this point by offering an 16\" handle that's easy to grasp and operate.\u003c\/p\u003e\u003cp\u003eThese wide, corner mounted handle allows for confident and easy lifting, even with a gloved hand. It's unlike any other and it's a joy to use.\u003c\/p\u003e\u003ch4\u003e2 Position Lid Vent\u003c\/h4\u003e\u003cp\u003eThe RM 2922 is equipped with a 2 position lid vent. Perfect for speeding up the cooling process.\u003c\/p\u003e\u003ch4\u003eSwing View Equipped\u003c\/h4\u003e\u003cp\u003eThe RM 2922 temperature controls are fitted to our Swing View Adjustable Enclosure.\u003c\/p\u003e\u003cp\u003eThe swing view is a pivoting, swing-up enclosure that allows you to rotate the control to a comfortable viewing and programming angle. Once you're done, lay it back down to see it from across your studio. It's that simple.\u003c\/p\u003e\u003cp\u003eThe swing view pairs well with touchscreen controls like the TAP II, Icon+ and Icon as viewing angle can be perfectly aligned. You'll love it.\u003c\/p\u003e\u003ch4\u003eSwing-Away Peephole Covers\u003c\/h4\u003e\u003cp\u003eOur kiln designs feature swing-away peephole covers as opposed to plugs.\u003c\/p\u003e\u003cp\u003ePlugs get lost and they get broken. Our attached peephole covers remain on the kiln and simply swing open and closed. You won't lose them and they certainly won't break.\u003c\/p\u003e\u003ch4\u003eLid Prop\u003c\/h4\u003e\u003cp\u003eThe RM 2922 is provided with a lid prop bars that positively keeps the lid in the open position. Simple operation is made even easier with our well designed lid handle.\u003c\/p\u003e\u003ch4\u003eRelay Access Port\u003c\/h4\u003e\u003cp\u003eThe RM 2922  incorporates our Relay Access Port for simple, no-panel-off relay replacement.\u003c\/p\u003e\u003cp\u003eSimply remove the access plate to gain access to the mechanical relays. There's no need to remove the control panel and dig into the internal wiring. It's absolutely simple and effective and all it takes is a screwdriver!\u003c\/p\u003e\u003cp\u003eIt's a given that mechanical relays will fail at some point. This relay access port really comes in handy when they do.\u003c\/p\u003e\u003ch4\u003eFull Stainless Steel Jackets\u003c\/h4\u003e\u003cp\u003eMulti-section, multi-jacketed kilns were conceived to lower production costs for the kiln manufacturer and to make life easier for the person installing the kiln. These are worthy goals but they come at the cost of kiln quality. It's a trade off we're not willing to make.\u003c\/p\u003e\u003cp\u003eWe build our kilns with full stainless jackets from top to bottom. Full stainless jackets mean absolutely solid, life extending construction. There are no leaks, no shifting and no weakness. Insist on Full Stainless Jackets for true build quality.\u003c\/p\u003e\u003ch3\u003eBuild options\u003c\/h3\u003e\u003ch4\u003eMultiple Control Options\u003c\/h4\u003e\u003cp\u003eThe RM 2922 is available in a variety of controls including the Icon, Icon+, Tap II and Rampmaster II.\u003c\/p\u003e\u003cp\u003eAt Evenheat we take the best control platforms on the market and make them even better by adding Special Limits thermocouples for precise temperature sensing and non-metallic faceplates for stellar Wi-Fi reception for on-line Apps.\u003c\/p\u003e\u003ch4\u003eQuiet Drive Solid State Relay Option\u003c\/h4\u003e\u003cp\u003eThe RM 2922 is available with our Quiet Drive Solid State Relay option.\u003c\/p\u003e\u003cp\u003eOur Quiet Drive Solid State Relay System offers tight temperature control, high reliability and increased heating element life. We fully expect our solid state relay to last the life of the unit. You want this!\u003c\/p\u003e\u003ch4\u003eVoltage Options\u003c\/h4\u003e\u003cp\u003eOur default production for the RM 2922 is 240V, Single Phase.\u003c\/p\u003e\u003cp\u003eWe do offer to build in 220V, 230V, 380V, 400V and 415V by request.\u003c\/p\u003e\u003cp\u003eAll controls available on the RM 2922 models will operate properly on both 50Hz and 60Hz line frequencies. To say it another way, line frequency has no effect. It doesn't matter.\u003c\/p\u003e\u003cp\u003eEvenheat recommends that you check your operating voltage before ordering or placing the kiln in service.\u003c\/p\u003e\u003ch4\u003eVoltage Phase Options\u003c\/h4\u003e\u003cp\u003eThe RM 2922 is available in 3 phase Delta and Wye (380V, 400V and 415V) designs by request.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChamber Dimensions:\u003c\/strong\u003e 29\" Diameter x 22.25\" Deep - 8.7 Cubic Feet\u003cbr\u003e(73.7cm Diameter x 56.5cm Deep - 246L)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Dimensions:\u003c\/strong\u003e 40\" D x 34\" W x 35.25\" H (with 8\" stand)\u003cbr\u003e(102cm D x 86.4 W x 89.5cm H)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Use Temperature:\u003c\/strong\u003e 2300°F (1260°C) \/ Cone 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Electrical:\u003c\/strong\u003e 240 Volts, 44 Amps, 10,560 Watts, 50\/60Hz, Single Phase\u003cbr\u003ePower Cord Plug Configuration - NEMA 6-50\u003cbr\u003eAvailable in 220V and 230V by request\u003cbr\u003eAvailable in 3 phase Delta and Wye (380V, 400V, 415V) by request\u003cbr\u003eOperates properly on both 50Hz and 60Hz\u003cbr\u003eConsult with an electrician for proper fuse panel, service wire size, receptacle, and fusing requirements. This model, used for its intended and expected purpose, would not be defined as \"continuous use\". Continuous use is defined as continuous, full power on for 3+ hours.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 260lb. (118Kg) - Approx.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Method:\u003c\/strong\u003e Freight Truck\u003cbr\u003eNRTL Listing Agency - TUV Listed United States and Canada - Designed and Tested to CSA \u0026amp; U\/L 499\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProduct description and specifications courtesy of Evenheat Kiln, Inc. Specifications subject to change by the manufacturer.\u003c\/p\u003e\u003ch3\u003eShipping, lead time \u0026amp; ordering\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade to order\u003c\/strong\u003e in the USA and shipped direct from the manufacturer in Caseville, MI. We confirm current lead time with you when you order.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips by motor freight (LTL truck)\u003c\/strong\u003e — freight is quoted upfront, before you pay for it. Residential liftgate delivery is available.\u003c\/li\u003e\n\u003cli\u003eQuestions? Call (737) 231-1880 or use \u003ca href=\"\/pages\/how-can-we-help\"\u003eGet a Quote\u003c\/a\u003e. Try our \u003ca href=\"\/pages\/electrical-readiness-checker\"\u003eElectrical Readiness Checker\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e and \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Evenheat","offers":[{"title":"Default Title","offer_id":50916795908353,"sku":null,"price":3480.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/9773\/6705\/files\/1ZxOQmMLZorc2nsncZUCKUZU98Imibgul.jpg?v=1793031205"},{"product_id":"evenheat-rm-2929-electric-kiln","title":"Evenheat RM 2929 Electric Kiln","description":"\u003cp\u003eDesigned and built for large working studios, production houses and centers of learning the RM II 2929 delivers on size, features and performance.\u003c\/p\u003e\u003cp\u003eThe RM 2929 features our TAP II, Icon+ and Rampmaster II controls and is standard equipped with our exclusive Swing View Adjustable Viewing which you will absolutely enjoy.\u003c\/p\u003e\u003cp\u003eOrder yours with our Quiet Drive Solid State relay option for tight temperature control and longer element life.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003ch4\u003eTop Load\u003c\/h4\u003e\u003cp\u003eThe RM 2929 is a top loading design and offers a chamber 29\" diameter x 29\" deep.\u003c\/p\u003e\u003ch4\u003eWonderful Lid Handle\u003c\/h4\u003e\u003cp\u003eWe love handles. Handles have to be properly sized and shaped for the job. Our lid handles make this point by offering an 16\" handle that's easy to grasp and operate.\u003c\/p\u003e\u003cp\u003eThese wide, corner mounted handle allows for confident and easy lifting, even with a gloved hand. It's unlike any other and it's a joy to use.\u003c\/p\u003e\u003ch4\u003e2 Position Lid Vent\u003c\/h4\u003e\u003cp\u003eThe RM 2929 is equipped with a 2 position lid vent. Perfect for speeding up the cooling process.\u003c\/p\u003e\u003ch4\u003eSwing View Equipped\u003c\/h4\u003e\u003cp\u003eThe RM 2929 temperature controls are fitted to our Swing View Adjustable Enclosure.\u003c\/p\u003e\u003cp\u003eThe swing view is a pivoting, swing-up enclosure that allows you to rotate the control to a comfortable viewing and programming angle. Once you're done, lay it back down to see it from across your studio. It's that simple.\u003c\/p\u003e\u003cp\u003eThe swing view pairs well with touchscreen controls like the TAP II, Icon+ and Icon as viewing angle can be perfectly aligned. You'll love it.\u003c\/p\u003e\u003ch4\u003eSwing-Away Peephole Covers\u003c\/h4\u003e\u003cp\u003eOur kiln designs feature swing-away peephole covers as opposed to plugs.\u003c\/p\u003e\u003cp\u003ePlugs get lost and they get broken. Our attached peephole covers remain on the kiln and simply swing open and closed. You won't lose them and they certainly won't break.\u003c\/p\u003e\u003ch4\u003eLid Prop\u003c\/h4\u003e\u003cp\u003eThe RM 2929 is provided with a lid prop bars that positively keeps the lid in the open position. Simple operation is made even easier with our well designed lid handle.\u003c\/p\u003e\u003ch4\u003eRelay Access Port\u003c\/h4\u003e\u003cp\u003eThe RM 2929  incorporates our Relay Access Port for simple, no-panel-off relay replacement.\u003c\/p\u003e\u003cp\u003eSimply remove the access plate to gain access to the mechanical relays. There's no need to remove the control panel and dig into the internal wiring. It's absolutely simple and effective and all it takes is a screwdriver!\u003c\/p\u003e\u003cp\u003eIt's a given that mechanical relays will fail at some point. This relay access port really comes in handy when they do.\u003c\/p\u003e\u003ch4\u003eSingle Maintenance Line \u0026amp;  Full Jackets\u003c\/h4\u003e\u003cp\u003eOur 29\" deep models feature a \"Maintenance Line\". The Maintenance Line is a split in the jacket between the upper and lower chamber that allows these models to be partially disassembled for ease in element replacement and kiln installation.\u003c\/p\u003e\u003cp\u003eThe upper chamber section is held securely in place through the use of stainless steel plates and screws. Simply remove the screws and separate the sections for maintenance or installation.\u003c\/p\u003e\u003cp\u003eWe do not use buckles to hold the sections together as they tend to loosen and allow shifting during loading, unloading and use.\u003c\/p\u003e\u003ch3\u003eBuild options\u003c\/h3\u003e\u003ch4\u003eMultiple Control Options\u003c\/h4\u003e\u003cp\u003eThe RM 2929 is available in a variety of controls including the Icon+, Tap II and Rampmaster II.\u003c\/p\u003e\u003cp\u003eAt Evenheat we take the best control platforms on the market and make them even better by adding Special Limits thermocouples for precise temperature sensing and non-metallic faceplates for stellar Wi-Fi reception for on-line Apps.\u003c\/p\u003e\u003ch4\u003eQuiet Drive Solid State Relay Option\u003c\/h4\u003e\u003cp\u003eThe RM 2929 is available with our Quiet Drive Solid State Relay option.\u003c\/p\u003e\u003cp\u003eOur Quiet Drive Solid State Relay System offers tight temperature control, high reliability and increased heating element life. We fully expect our solid state relay to last the life of the unit. You want this!\u003c\/p\u003e\u003ch4\u003eVoltage Options\u003c\/h4\u003e\u003cp\u003eOur default production for the RM 2929 is 240V, Single Phase.\u003c\/p\u003e\u003cp\u003eWe do offer to build in 220V, 230V, 380V, 400V and 415V by request.\u003c\/p\u003e\u003cp\u003eAll controls available on the RM 2929 models will operate properly on both 50Hz and 60Hz line frequencies. To say it another way, line frequency has no effect. It doesn't matter.\u003c\/p\u003e\u003cp\u003eEvenheat recommends that you check your operating voltage before ordering or placing the kiln in service.\u003c\/p\u003e\u003ch4\u003eVoltage Phase Options\u003c\/h4\u003e\u003cp\u003eThe RM 2929 is available in 3 phase Delta and Wye (380V, 400V and 415V) designs by request.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChamber Dimensions:\u003c\/strong\u003e 29\" Diameter x 29\" Deep - 11.3 Cubic Feet\u003cbr\u003e(73.7cm Diameter x 73.7cm Deep - 320L)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Dimensions:\u003c\/strong\u003e 40\" D x 34\" W x 42\" H (with 8\" stand)\u003cbr\u003e(102cm D x 86.4 W x 107cm H)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Use Temperature:\u003c\/strong\u003e 2300°F (1260°C) \/ Cone 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Electrical:\u003c\/strong\u003e 240 Volts, 56 Amps, 13,440 Watts, 50\/60Hz, Single Phase\u003cbr\u003eDirect Wired\u003cbr\u003eAvailable in 220V and 230V by request\u003cbr\u003eAvailable in 3 phase Delta and Wye (380V, 400V, 415V) by request\u003cbr\u003eOperates properly on both 50Hz and 60Hz\u003cbr\u003eConsult with an electrician for proper fuse panel, service wire size, receptacle, and fusing requirements. This model, used for its intended and expected purpose, would not be defined as \"continuous use\". Continuous use is defined as continuous, full power on for 3+ hours.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 320lb. (145Kg) - Approx.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Method:\u003c\/strong\u003e Freight Truck\u003cbr\u003eNRTL Listing Agency - TUV Listed United States and Canada - Designed and Tested to CSA \u0026amp; U\/L 499\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProduct description and specifications courtesy of Evenheat Kiln, Inc. Specifications subject to change by the manufacturer.\u003c\/p\u003e\u003ch3\u003eShipping, lead time \u0026amp; ordering\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade to order\u003c\/strong\u003e in the USA and shipped direct from the manufacturer in Caseville, MI. We confirm current lead time with you when you order.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips by motor freight (LTL truck)\u003c\/strong\u003e — freight is quoted upfront, before you pay for it. Residential liftgate delivery is available.\u003c\/li\u003e\n\u003cli\u003eQuestions? Call (737) 231-1880 or use \u003ca href=\"\/pages\/how-can-we-help\"\u003eGet a Quote\u003c\/a\u003e. Try our \u003ca href=\"\/pages\/electrical-readiness-checker\"\u003eElectrical Readiness Checker\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e and \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Evenheat","offers":[{"title":"Default Title","offer_id":50916795941121,"sku":null,"price":4092.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/9773\/6705\/files\/1mOB1JGhv99WNNIYfzkgchgE-dNu9afLX.jpg?v=1793031206"},{"product_id":"evenheat-rm-2522-electric-kiln","title":"Evenheat RM 2522 Electric Kiln","description":"\u003cp\u003eThe RM 2522 is designed for all firing up to cone 03 (2000°F). The oval shape creates a large volume and the load friendly depth of 22\" is a welcome feature. Perfect for production and busy ceramic studios.\u003c\/p\u003e\u003cp\u003eThe 2522 is equipped with an electrical plug which means a standard 50A receptacle is all that is needed. No direct wiring required!\u003c\/p\u003e\u003cp\u003eThe RM 2522 features our TAP II, Icon+ and Rampmaster II controls and is standard equipped with our exclusive Swing View Adjustable Viewing which you will absolutely enjoy.\u003c\/p\u003e\u003cp\u003eOrder yours with our Quiet Drive Solid State relay option for tight temperature control and longer element life.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003ch4\u003eTop Load\u003c\/h4\u003e\u003cp\u003eThe RM 2522 is a top loading design and offers a chamber 41\" wide x 25.25\" Long x 22.25\" Deep. This puts the rim of the chamber at 33\" which is waist height or lower making it very easy to load.\u003c\/p\u003e\u003ch4\u003eWonderful Lid Handle\u003c\/h4\u003e\u003cp\u003eWe love handles. Handles have to be properly sized and shaped for the job. Our lid handles make this point by offering an long handle that's easy to grasp and operate.\u003c\/p\u003e\u003cp\u003eThis wide, corner mounted handle allows for confident and easy lifting, even with a gloved hand. It's unlike any other and it's a joy to use.\u003c\/p\u003e\u003ch4\u003eSwing View Equipped\u003c\/h4\u003e\u003cp\u003eThe RM 2522 temperature controls are fitted to our Swing View Adjustable Enclosure.\u003c\/p\u003e\u003cp\u003eThe swing view is a pivoting, swing-up enclosure that allows you to rotate the control to a comfortable viewing and programming angle. Once you're done, lay it back down to see it from across your studio. It's that simple.\u003c\/p\u003e\u003cp\u003eThe swing view pairs well with touchscreen controls like the TAP II, Icon+ and Icon as viewing angle can be perfectly aligned. You'll love it.\u003c\/p\u003e\u003ch4\u003eSwing-Away Peephole Covers\u003c\/h4\u003e\u003cp\u003eOur kiln designs feature swing-away peephole covers as opposed to plugs.\u003c\/p\u003e\u003cp\u003ePlugs get lost and they get broken. Our attached peephole covers remain on the kiln and simply swing open and closed. You won't lose them and they certainly won't break.\u003c\/p\u003e\u003ch4\u003eLid Prop\u003c\/h4\u003e\u003cp\u003eThe RM 2522 is provided with a lid prop bar that positively keeps the lid in the open position. Simple operation is made even easier with our well designed lid handle.\u003c\/p\u003e\u003ch4\u003eRelay Access Port\u003c\/h4\u003e\u003cp\u003eThe RM 2522  incorporates our Relay Access Port for simple, no-panel-off relay replacement.\u003c\/p\u003e\u003cp\u003eSimply remove the access plate to gain access to the mechanical relays. There's no need to remove the control panel and dig into the internal wiring. It's absolutely simple and effective and all it takes is a screwdriver!\u003c\/p\u003e\u003cp\u003eIt's a given that mechanical relays will fail at some point. This relay access port really comes in handy when they do.\u003c\/p\u003e\u003ch4\u003eFull Stainless Steel Jackets\u003c\/h4\u003e\u003cp\u003eMulti-section, multi-jacketed kilns were conceived to lower production costs for the kiln manufacturer and to make life easier for the person installing the kiln. These are worthy goals but they come at the cost of kiln quality. It's a trade off we're not willing to make.\u003c\/p\u003e\u003cp\u003eWe build our kilns with full stainless jackets from top to bottom. Full stainless jackets mean absolutely solid, life extending construction. There are no leaks, no shifting and no weakness. Insist on Full Stainless Jackets for true build quality.\u003c\/p\u003e\u003ch3\u003eBuild options\u003c\/h3\u003e\u003ch4\u003eMultiple Control Options\u003c\/h4\u003e\u003cp\u003eThe RM 2522 is available in a variety of controls including the Icon+, Tap II and Rampmaster II.\u003c\/p\u003e\u003cp\u003eAt Evenheat we take the best control platforms on the market and make them even better by adding Special Limits thermocouples for precise temperature sensing and non-metallic faceplates for stellar Wi-Fi reception for on-line Apps.\u003c\/p\u003e\u003ch4\u003eQuiet Drive Solid State Relay Option\u003c\/h4\u003e\u003cp\u003eThe RM 2522 is available with our Quiet Drive Solid State Relay option.\u003c\/p\u003e\u003cp\u003eOur Quiet Drive Solid State Relay System offers tight temperature control, high reliability and increased heating element life. We fully expect our solid state relay to last the life of the unit. You want this!\u003c\/p\u003e\u003ch4\u003eVoltage Options\u003c\/h4\u003e\u003cp\u003eOur default production for the RM 2522 is 240V, Single Phase.\u003c\/p\u003e\u003cp\u003eWe do offer to build in 220V, 230V, 380V, 400V and 415V by request.\u003c\/p\u003e\u003cp\u003eAll controls available on the RM 2522 models will operate properly on both 50Hz and 60Hz line frequencies. To say it another way, line frequency has no effect. It doesn't matter.\u003c\/p\u003e\u003cp\u003eEvenheat recommends that you check your operating voltage before ordering or placing the kiln in service.\u003c\/p\u003e\u003ch4\u003eVoltage Phase Options\u003c\/h4\u003e\u003cp\u003eThe RM 2522 is available in 3 phase Delta and Wye (380V, 400V and 415V) designs by request.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChamber Dimensions:\u003c\/strong\u003e 41\" Wide x 25.25\" Long x 22.25\" Deep - 11.2 Cubic Feet\u003cbr\u003e(104cm Wide x 64cm Long x 56.5cm Deep - 317L)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Dimensions:\u003c\/strong\u003e 50\" Wide x 30.25\" Long x 35.25\" H (with 8\" stand)\u003cbr\u003e(127cm Wide x 77.5cm Long x 89.5cm H)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Use Temperature:\u003c\/strong\u003e 2000°F (1093°C) \/ Cone 03\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Electrical:\u003c\/strong\u003e 240 Volts, 47 Amps, 11,280 Watts, 50\/60Hz, Single Phase\u003cbr\u003ePower Cord Plug Configuration - NEMA 6-50\u003cbr\u003eAvailable in 220V and 230V by request\u003cbr\u003eAvailable in 3 phase Delta and Wye (380V, 400V, 415V) by request\u003cbr\u003eOperates properly on both 50Hz and 60Hz\u003cbr\u003eConsult with an electrician for proper fuse panel, service wire size, receptacle, and fusing requirements. This model, used for its intended and expected purpose, would not be defined as \"continuous use\". Continuous use is defined as continuous, full power on for 3+ hours.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 370lb. (118Kg) - Approx.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Method:\u003c\/strong\u003e Freight Truck\u003cbr\u003eNRTL Listing Agency - TUV Listed United States and Canada - Designed and Tested to CSA \u0026amp; U\/L 499\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProduct description and specifications courtesy of Evenheat Kiln, Inc. Specifications subject to change by the manufacturer.\u003c\/p\u003e\u003ch3\u003eShipping, lead time \u0026amp; ordering\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade to order\u003c\/strong\u003e in the USA and shipped direct from the manufacturer in Caseville, MI. We confirm current lead time with you when you order.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips by motor freight (LTL truck)\u003c\/strong\u003e — freight is quoted upfront, before you pay for it. Residential liftgate delivery is available.\u003c\/li\u003e\n\u003cli\u003eQuestions? Call (737) 231-1880 or use \u003ca href=\"\/pages\/how-can-we-help\"\u003eGet a Quote\u003c\/a\u003e. Try our \u003ca href=\"\/pages\/electrical-readiness-checker\"\u003eElectrical Readiness Checker\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e and \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Evenheat","offers":[{"title":"Default Title","offer_id":50916795973889,"sku":null,"price":3760.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/9773\/6705\/files\/1s6HHJz9Q1tHeGBTMmBQiGb2F9Y9HhPt4.jpg?v=1793031208"},{"product_id":"evenheat-rm-2541-electric-kiln","title":"Evenheat RM 2541 Electric Kiln","description":"\u003cp\u003eThe RM 2541 is our largest ceramic kiln and is designed for all firing up to cone 03 (2000°F).\u003c\/p\u003e\u003cp\u003eThe RM 2541 features our TAP II, Icon+ and Rampmaster II controls and is standard equipped with our exclusive Swing View Adjustable Viewing which you will absolutely enjoy.\u003c\/p\u003e\u003cp\u003eOrder yours with our Quiet Drive Solid State relay option for tight temperature control and longer element life.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003ch4\u003eTop Load\u003c\/h4\u003e\u003cp\u003eThe RM 2541 is a top loading design and offers a chamber 41\" wide x 25.25\" Long x 29\" Deep. It's our largest firing chamber at 14.4 cubic feet.\u003c\/p\u003e\u003ch4\u003eWonderful Lid Handle\u003c\/h4\u003e\u003cp\u003eWe love handles. Handles have to be properly sized and shaped for the job. Our lid handles make this point by offering an long handle that's easy to grasp and operate.\u003c\/p\u003e\u003cp\u003eThis wide, corner mounted handle allows for confident and easy lifting, even with a gloved hand. It's unlike any other and it's a joy to use.\u003c\/p\u003e\u003ch4\u003eSwing View Equipped\u003c\/h4\u003e\u003cp\u003eThe RM 2541 temperature controls are fitted to our Swing View Adjustable Enclosure.\u003c\/p\u003e\u003cp\u003eThe swing view is a pivoting, swing-up enclosure that allows you to rotate the control to a comfortable viewing and programming angle. Once you're done, lay it back down to see it from across your studio. It's that simple.\u003c\/p\u003e\u003cp\u003eThe swing view pairs well with touchscreen controls like the TAP II, Icon+ and Icon as viewing angle can be perfectly aligned. You'll love it.\u003c\/p\u003e\u003ch4\u003eSwing-Away Peephole Covers\u003c\/h4\u003e\u003cp\u003eOur kiln designs feature swing-away peephole covers as opposed to plugs.\u003c\/p\u003e\u003cp\u003ePlugs get lost and they get broken. Our attached peephole covers remain on the kiln and simply swing open and closed. You won't lose them and they certainly won't break.\u003c\/p\u003e\u003ch4\u003eLid Prop\u003c\/h4\u003e\u003cp\u003eThe RM 2541 is provided with a lid prop bar that positively keeps the lid in the open position. Simple operation is made even easier with our well designed lid handle.\u003c\/p\u003e\u003ch4\u003eRelay Access Port\u003c\/h4\u003e\u003cp\u003eThe RM 2541  incorporates our Relay Access Port for simple, no-panel-off relay replacement.\u003c\/p\u003e\u003cp\u003eSimply remove the access plate to gain access to the mechanical relays. There's no need to remove the control panel and dig into the internal wiring. It's absolutely simple and effective and all it takes is a screwdriver!\u003c\/p\u003e\u003cp\u003eIt's a given that mechanical relays will fail at some point. This relay access port really comes in handy when they do.\u003c\/p\u003e\u003ch4\u003eSingle Maintenance Line \u0026amp; Full Jackets\u003c\/h4\u003e\u003cp\u003eOur 29\" deep models feature a \"Maintenance Line\". The Maintenance Line is a split in the jacket between the upper and lower chamber that allows these models to be partially disassembled for ease in element replacement and kiln installation.\u003c\/p\u003e\u003cp\u003eThe upper chamber section is held securely in place through the use of stainless steel plates and screws. Simply remove the screws and separate the sections for maintenance or installation.\u003c\/p\u003e\u003cp\u003eWe do not use buckles to hold the sections together as they tend to loosen and allow shifting during loading, unloading and use.\u003c\/p\u003e\u003ch3\u003eBuild options\u003c\/h3\u003e\u003ch4\u003eMultiple Control Options\u003c\/h4\u003e\u003cp\u003eThe RM 2541 is available in a variety of controls including the Icon+, Tap II and Rampmaster II.\u003c\/p\u003e\u003cp\u003eAt Evenheat we take the best control platforms on the market and make them even better by adding Special Limits thermocouples for precise temperature sensing and non-metallic faceplates for stellar Wi-Fi reception for on-line Apps.\u003c\/p\u003e\u003ch4\u003eQuiet Drive Solid State Relay Option\u003c\/h4\u003e\u003cp\u003eThe RM 2541 is available with our Quiet Drive Solid State Relay option.\u003c\/p\u003e\u003cp\u003eOur Quiet Drive Solid State Relay System offers tight temperature control, high reliability and increased heating element life. We fully expect our solid state relay to last the life of the unit. You want this!\u003c\/p\u003e\u003ch4\u003eVoltage Options\u003c\/h4\u003e\u003cp\u003eOur default production for the RM 2541 is 240V, Single Phase.\u003c\/p\u003e\u003cp\u003eWe do offer to build in 220V, 230V, 380V, 400V and 415V by request.\u003c\/p\u003e\u003cp\u003eAll controls available on the RM 2541 models will operate properly on both 50Hz and 60Hz line frequencies. To say it another way, line frequency has no effect. It doesn't matter.\u003c\/p\u003e\u003cp\u003eEvenheat recommends that you check your operating voltage before ordering or placing the kiln in service.\u003c\/p\u003e\u003ch4\u003eVoltage Phase Options\u003c\/h4\u003e\u003cp\u003eThe RM 2541 is available in 3 phase Delta and Wye (380V, 400V and 415V) designs by request.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChamber Dimensions:\u003c\/strong\u003e 41\" Wide x 25.25\" Long x 29\" Deep - 14.4 Cubic Feet\u003cbr\u003e(104cm Wide x 64cm Long x 73.7cm Deep - 408L)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Dimensions:\u003c\/strong\u003e 50\" Wide x 30.25\" Long x 42\" H (with 8\" stand)\u003cbr\u003e(127cm Wide x 77.5cm Long x 107cm H)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Use Temperature:\u003c\/strong\u003e 2000°F (1093°C) \/ Cone 03\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Electrical:\u003c\/strong\u003e 240 Volts, 60 Amps, 14,400 Watts, 50\/60Hz, Single Phase\u003cbr\u003eDirect Wired\u003cbr\u003eAvailable in 220V and 230V by request\u003cbr\u003eAvailable in 3 phase Delta and Wye (380V, 400V, 415V) by request\u003cbr\u003eOperates properly on both 50Hz and 60Hz\u003cbr\u003eConsult with an electrician for proper fuse panel, service wire size, receptacle, and fusing requirements. This model, used for its intended and expected purpose, would not be defined as \"continuous use\". Continuous use is defined as continuous, full power on for 3+ hours.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 420lb. (191Kg) - Approx.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Method:\u003c\/strong\u003e Freight Truck\u003cbr\u003eNRTL Listing Agency - TUV Listed United States and Canada - Designed and Tested to CSA \u0026amp; U\/L 499\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProduct description and specifications courtesy of Evenheat Kiln, Inc. Specifications subject to change by the manufacturer.\u003c\/p\u003e\u003ch3\u003eShipping, lead time \u0026amp; ordering\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade to order\u003c\/strong\u003e in the USA and shipped direct from the manufacturer in Caseville, MI. We confirm current lead time with you when you order.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips by motor freight (LTL truck)\u003c\/strong\u003e — freight is quoted upfront, before you pay for it. Residential liftgate delivery is available.\u003c\/li\u003e\n\u003cli\u003eQuestions? Call (737) 231-1880 or use \u003ca href=\"\/pages\/how-can-we-help\"\u003eGet a Quote\u003c\/a\u003e. Try our \u003ca href=\"\/pages\/electrical-readiness-checker\"\u003eElectrical Readiness Checker\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e and \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Evenheat","offers":[{"title":"Default Title","offer_id":50916796104961,"sku":null,"price":4396.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/9773\/6705\/files\/1J3JT_1h65E8x-PDYZkR5rZohqH4elzOP.jpg?v=1793031210"},{"product_id":"paragon-ct122829-ceramic-and-pottery-kiln-12-sided","title":"Paragon CT122829 Ceramic and Pottery Kiln 12 Sided","description":"\u003ch3\u003e\u003cstrong\u003ePARAGON CT122829: Extra-Deep, Extra-Capable, and Built to Keep Up\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eBuilt on the Ceramic Top legacy\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe PARAGON CT Series—short for Ceramic Top—delivers professional-grade performance with durability and thoughtful engineering built into every model. These round kilns are trusted by ceramic artists, educators, and studios alike for their consistency and longevity. Every CT model includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e3” thick firebrick throughout for superior insulation\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSolid state relay (SSR) for quieter, more efficient, and longer-lasting performance\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAOP (Auxiliary Outlet Plug) and vent-ready design (pre-drilled for kiln vent installation)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDropped, recessed element grooves—no pins required\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFull-formed galvanized steel base that strengthens and protects the firing chamber\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDust-resistant coating on lid, peepholes, and rim to extend component life\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eWhy choose the PARAGON CT122829?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe PARAGON CT122829 is a round, 12-sided kiln with an interior diameter of 28” and an extended height of 29”, offering a commanding 10.57 cubic feet of firing capacity.\u003c\/p\u003e\n\u003cp\u003eAs the deepest model in the CT Series, this kiln is designed for serious production work—capable of handling tall sculptures, stacked loads of functional ware, or large batches in educational and commercial environments.\u003c\/p\u003e\n\u003cp\u003eIf you need maximum volume without compromising on performance, this is the kiln for you. also, a\u003cspan\u003et a cost per cubic foot, the CT122829 is one of the most economically priced standard kilns we make.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eDurability meets convenience\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe CT122829 features sectional construction, making it easy to disassemble for maintenance or transport through tight doorways.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe kiln’s drop-down switch box—hinged at the bottom and held by a fold-out support arm—makes service access quick and safe.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e Its massive 3” thick lid is supported by Paragon’s LiteLid spring system, eliminating the need for pulleys and making lid lifting light and effortless. The reversible brick floor helps maximize kiln life by allowing even wear over time.\u003c\/p\u003e\n\u003cp\u003eA top row of grooveless 2” blank bricks reduces damage during loading. \u003c\/p\u003e\n\u003cp\u003eThis model has been upgraded to 48 amps for greater power and faster recovery, helping it reach temperature with less strain.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eAdditional Highlights\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eSectional design with twist-lock spring latches\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLock-in lid support with positive catch\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTwo wide-view tapered peepholes\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFire directly on the brick bottom for full capacity\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eVentilated, louvered switch box\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHeavy-duty stainless steel case\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCertified to CSA and UL Standard 499\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eOptional Furniture Kit\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e8 C-24H Shelves (26” octagon x ¾”)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1½” square posts, 8 each: 1”, 2”, 3”, 4”, 5”, 6”\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1 lb. kiln wash\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eThe Kiln Stand\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eIn the Available Options, please choose the Standard Kiln Stand (6\" tall with mar-proof plastic feet), or the 12\" Deluxe Rolling Kiln Stand (Recommended if you are adding a VentMaster Kiln Vent).\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eOptional Kiln Vent\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe patented Orton Vent Master not only vents fumes but also improves firing results. Read the Add-On section to learn more.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eBuilt with Pride in Mesquite, Texas\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eEvery Paragon kiln is handcrafted in Mesquite, Texas by a dedicated team of skilled craftsmen and craftswomen. With decades of experience behind us, we take pride in building kilns that deliver lasting performance, precision, and peace of mind.\u003c\/p\u003e\n\u003cp\u003eFrom our engineers to our assembly team, we stand behind every kiln we make—because we know what it means to invest in your craft. When you choose Paragon, you're not just buying a kiln—you're gaining the backing of a company that truly cares about your success.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInterior: 28″ W × 29″ D (10.57 cu ft)\u003c\/li\u003e\n\u003cli\u003eElectrical configurations: 208V, 208V 3-phase, 240V, 240V 3-phase (confirm amperage, plug and circuit with your electrician)\u003c\/li\u003e\n\u003cli\u003eManufacturer part number (base configuration): 3061C0MGDE\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePriced for the base configuration. Options (voltage, stands, vents, relays, windows) are quoted on request. Specifications subject to change by the manufacturer.\u003c\/p\u003e\u003ch3\u003eShipping, lead time \u0026amp; ordering\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade to order\u003c\/strong\u003e in the USA and shipped direct from the manufacturer in Mesquite, TX. We confirm current lead time with you when you order.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips by motor freight (LTL truck)\u003c\/strong\u003e — freight is quoted upfront, before you pay for it. Residential liftgate delivery is available.\u003c\/li\u003e\n\u003cli\u003eQuestions? Call (737) 231-1880 or use \u003ca href=\"\/pages\/how-can-we-help\"\u003eGet a Quote\u003c\/a\u003e. Try our \u003ca href=\"\/pages\/electrical-readiness-checker\"\u003eElectrical Readiness Checker\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e and \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Paragon","offers":[{"title":"Default Title","offer_id":50925417169153,"sku":"3061C0MGDE","price":5850.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/9773\/6705\/files\/CT122829-Viking.png?v=1792688478"},{"product_id":"paragon-ct122829-viking-heavy-duty-12-sided-ceramic-porcelain-stoneware-kiln","title":"Paragon CT122829 Viking - Heavy Duty 12-Sided Ceramic\/Porcelain\/Stoneware Kiln","description":"\u003ch3\u003ePARAGON CT122829 Viking: Our Largest Viking Workhorse—Built to Fire Hard and Last Long\u003c\/h3\u003e\n\u003cp\u003eBuilt on the Ceramic Top legacy—engineered for maximum volume and heavy-duty reliability.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe PARAGON CT122829 Viking is the ultimate solution for high-capacity studios that demand durability, power, and consistency. Based on the trusted CT platform, this Viking edition is strengthened with industrial-grade components, reinforced electrical systems, and thoughtful structural upgrades to support nonstop, high-temperature production firing. When the job is big, the stakes are high, and the schedule is tight—this is the kiln you trust.\u003c\/p\u003e\n\u003ch3\u003eWhy choose the PARAGON CT122829 Viking?\u003c\/h3\u003e\n\u003cp\u003eThe CT122829 Viking is a 12-sided round kiln with an interior diameter of 28” and an impressive 29” interior height, delivering a massive 10.57 cubic feet of usable space. It’s the largest model in the CT Series, perfect for tall hand-built sculptures, deep stacks of ware, or bulk firing cycles in busy schools and production shops.\u003c\/p\u003e\n\u003cp\u003eThanks to a 48-amp upgrade, this model recovers heat faster, fires more efficiently, and endures cone 10 loads with ease—even during demanding back-to-back firing schedules.\u003c\/p\u003e\n\u003ch3\u003eViking Upgrades for Heavy-Duty Use\u003c\/h3\u003e\n\u003cp\u003eThe Viking edition is built for serious ceramic work, day in and day out. It includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eHigher amperage-rated electrical components for improved power delivery\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIndustrial-grade relays and wiring for enhanced durability and heat tolerance\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRugged case structure and internal bracing to minimize vibration and extend lifespan\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOptimized element pathways to ensure long element life and firing consistency\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis kiln is purpose-built to thrive under pressure.\u003c\/p\u003e\n\u003ch3\u003eDurability Meets Convenience\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e3” thick firebrick for optimal insulation and energy efficiency\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSectional construction with twist-lock spring latches allows for easy disassembly, service, and transport\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSolid state relay (SSR) for quiet, accurate, and long-lasting performance\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAOP (Auxiliary Outlet Plug) and vent-ready design, pre-drilled for the Orton Vent Master\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDropped, recessed element grooves—no pins required\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTop row of grooveless 2” blank bricks reduces wear during loading\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eReversible firebrick floor for even wear and longer life\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDrop-down switch box, hinged with a fold-out support arm for easy access\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePatented LiteLid spring-assisted lid system for effortless lifting and less lid wear\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLock-in lid support with positive catch\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTwo wide-view tapered peepholes for easy monitoring\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFire directly on the brick bottom to maximize usable space\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eVentilated, louvered switch box for internal cooling\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHeavy-duty stainless steel case\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCertified to CSA and UL Standard 499\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrecision Control with the SENTINEL Smart Touch Controller\u003c\/h3\u003e\n\u003cp\u003eIncluded standard with the Viking edition, the SENTINEL Smart Touch Controller features a bright color touchscreen, ramp-hold and cone-fire modes, customizable programs, and advanced diagnostics. Whether you’re managing a full production cycle or complex artist workflows, the SENTINEL delivers reliable, programmable control in a user-friendly interface.\u003c\/p\u003e\n\u003ch3\u003eOptional Add-Ons\u003c\/h3\u003e\n\u003cp\u003eFurniture Kit:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e8 C-24H Shelves (26” octagon x ¾”)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1½” square posts, 8 each: 1”, 2”, 3”, 4”, 5”, 6”\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1 lb. kiln wash\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eKiln Stand Options:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eStandard 6\" stand with mar-proof plastic feet\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e12\" Deluxe Rolling Stand (recommended with the VentMaster)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eKiln Vent:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eThe Orton Vent Master improves firing results and maintains cleaner air quality by safely venting kiln emissions—highly recommended for frequent, full-load firings.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBuilt with Pride in Mesquite, Texas\u003c\/h3\u003e\n\u003cp\u003eEvery PARAGON CT122829 Viking is handcrafted in our Mesquite, Texas facility by a team of skilled professionals who understand what real production demands. This kiln is not a compromise—it’s a commitment to power, endurance, and performance.\u003c\/p\u003e\n\u003cp\u003eWhen you're firing big loads, tall pieces, or running day after day, the Viking stands ready.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInterior: 28″ W × 29″ D (10.57 cu ft)\u003c\/li\u003e\n\u003cli\u003eMax temperature: cone 10\u003c\/li\u003e\n\u003cli\u003eElectrical configurations: 208V, 208V 3-phase, 240V, 240V 3-phase (confirm amperage, plug and circuit with your electrician)\u003c\/li\u003e\n\u003cli\u003eManufacturer part number (base configuration): 3061C0VADE\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePriced for the base configuration. Options (voltage, stands, vents, relays, windows) are quoted on request. Specifications subject to change by the manufacturer.\u003c\/p\u003e\u003ch3\u003eShipping, lead time \u0026amp; ordering\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade to order\u003c\/strong\u003e in the USA and shipped direct from the manufacturer in Mesquite, TX. We confirm current lead time with you when you order.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips by motor freight (LTL truck)\u003c\/strong\u003e — freight is quoted upfront, before you pay for it. Residential liftgate delivery is available.\u003c\/li\u003e\n\u003cli\u003eQuestions? Call (737) 231-1880 or use \u003ca href=\"\/pages\/how-can-we-help\"\u003eGet a Quote\u003c\/a\u003e. Try our \u003ca href=\"\/pages\/electrical-readiness-checker\"\u003eElectrical Readiness Checker\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e and \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Paragon","offers":[{"title":"Default Title","offer_id":50925417201921,"sku":"3061C0VADE","price":6300.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/9773\/6705\/files\/CT122829-Viking_4cfdb3b3-b099-4001-b9a5-c36a7b46fe4f.png?v=1792688479"},{"product_id":"paragon-ct122829-janus-ceramic-and-glass-kiln-12-sided","title":"Paragon CT122829 Janus Ceramic and Glass Kiln 12 Sided","description":"\u003ch3\u003ePARAGON CT122829 Janus: Massive Capacity, Maximum Flexibility—for the Serious Clay and Glass Studio\u003c\/h3\u003e\n\u003cp\u003eBuilt on the Ceramic Top legacy—now equipped for dual-firing mastery.\u003cbr\u003eThe PARAGON CT Series, long trusted by production studios and art programs alike, is known for its power, durability, and user-friendly engineering. The PARAGON CT122829 Janus builds on that legacy with a bold combination of size and versatility: a powerful, high-volume kiln that fires both ceramics and glass through an intuitive mode-switching system.\u003c\/p\u003e\n\u003cp\u003eWhether you’re tackling large-scale sculpture or multi-layered glasswork, the CT122829 Janus adapts to your creative needs without compromise.\u003c\/p\u003e\n\u003ch3\u003eWhy choose the PARAGON CT122829 Janus?\u003c\/h3\u003e\n\u003cp\u003eAs the deepest and most spacious kiln in the CT line, the CT122829 Janus offers a commanding 10.57 cubic feet of firing space, with a 28” interior diameter and 29” interior height. This massive capacity supports everything from tall, hand-built forms to fully stacked production runs of functional ware or glass panels.\u003c\/p\u003e\n\u003cp\u003eNow upgraded to 48 amps, this kiln delivers faster heat recovery and greater power, supporting consistent, repeatable performance—even in high-volume firing cycles.\u003c\/p\u003e\n\u003cp\u003eAnd with Janus dual-mode firing, you get all this performance in one unit that does it all.\u003c\/p\u003e\n\u003ch3\u003eJanus Dual-Mode Firing: Glass or Pottery with the Flip of a Switch\u003c\/h3\u003e\n\u003cp\u003eThe defining feature of this model is its dual-element system—with heating coils in both the top and sidewalls. You can switch between firing modes depending on your material:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eGlass Mode: engages the top and middle sidewall elements—ideal for fusing, slumping, or sagging large glass pieces on a single shelf.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePottery Mode: uses only the sidewall elements for even, surround heat distribution—perfect for cone 10 ceramics, bisque, glaze firings, or stacked ware.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis flexibility makes the CT122829 Janus a powerhouse for schools, production shops, and mixed-media studios that need one kiln to do it all.\u003c\/p\u003e\n\u003ch3\u003eDurability Meets Convenience\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e3” thick firebrick for maximum insulation and energy efficiency\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSectional construction for easier brick repair, element replacement, or doorway navigation\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSolid state relay (SSR) for silent, efficient, and reliable operation\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAOP (Auxiliary Outlet Plug) and vent-ready design, pre-drilled for VentMaster installation\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTop row of grooveless 2” blank bricks reduces chipping during loading\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eReversible firebrick floor for longer lifespan and more even wear\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLiteLid spring-assisted lid lift system—no pulleys or counterweights, just smooth, single-hand lifting\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDrop-down switch box with fold-out arm for safe and easy maintenance access\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTwo wide-view tapered peepholes for at-a-glance firing checks\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLock-in lid support with positive catch\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFire directly on the brick bottom for full capacity\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eVentilated, louvered switch box to keep internal components cool\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHeavy-duty stainless steel case\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCertified to CSA and UL Standard 499\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eControlled by the SENTINEL Smart Touch Controller\u003c\/h3\u003e\n\u003cp\u003eJanus kiln comes equipped with the SENTINEL Smart Touch Controller—a user-friendly, feature-rich interface with a large color touchscreen, custom glass and ceramic profiles, cone-fire and ramp-hold capabilities, and built-in diagnostics. The SENTINEL ensures that no matter what you’re firing—or how often—you get consistent results and easy access to advanced control features.\u003c\/p\u003e\n\u003ch3\u003eOptional Add-Ons\u003c\/h3\u003e\n\u003cp\u003eFurniture Kit:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e8 C-24H Shelves (26” octagon x ¾”)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1½” square posts, 8 each: 1”, 2”, 3”, 4”, 5”, 6”\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1 lb. kiln wash\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eKiln Stand Options:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eStandard 6\" stand with mar-proof plastic feet\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e12\" Deluxe Rolling Stand (recommended if using a VentMaster kiln vent)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eKiln Vent:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eThe Orton Vent Master improves temperature uniformity and helps remove fumes for a cleaner, more consistent firing environment. See Add-Ons for more details.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBuilt with Pride in Mesquite, Texas\u003c\/h3\u003e\n\u003cp\u003eLike every kiln we make, the PARAGON CT122829 Janus is handcrafted in our Mesquite, Texas facility by skilled professionals who understand the demands of serious ceramic and glass work. It’s more than just a kiln—it’s a high-performance, multi-purpose tool backed by decades of experience and a passionate commitment to your success.\u003c\/p\u003e\n\u003cp\u003eWhen you fire with Paragon, you're not just investing in equipment. You’re investing in reliability, flexibility, and the freedom to create without limits.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInterior: 28″ W × 29″ D (10.57 cu ft)\u003c\/li\u003e\n\u003cli\u003eMax temperature: cone 10\u003c\/li\u003e\n\u003cli\u003eElectrical configurations: 208V, 208V 3-phase, 240V, 240V 3-phase (confirm amperage, plug and circuit with your electrician)\u003c\/li\u003e\n\u003cli\u003eManufacturer part number (base configuration): 3061CNMGDE\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePriced for the base configuration. Options (voltage, stands, vents, relays, windows) are quoted on request. Specifications subject to change by the manufacturer.\u003c\/p\u003e\u003ch3\u003eShipping, lead time \u0026amp; ordering\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade to order\u003c\/strong\u003e in the USA and shipped direct from the manufacturer in Mesquite, TX. We confirm current lead time with you when you order.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips by motor freight (LTL truck)\u003c\/strong\u003e — freight is quoted upfront, before you pay for it. Residential liftgate delivery is available.\u003c\/li\u003e\n\u003cli\u003eQuestions? Call (737) 231-1880 or use \u003ca href=\"\/pages\/how-can-we-help\"\u003eGet a Quote\u003c\/a\u003e. Try our \u003ca href=\"\/pages\/electrical-readiness-checker\"\u003eElectrical Readiness Checker\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e and \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Paragon","offers":[{"title":"Default Title","offer_id":50925417234689,"sku":"3061CNMGDE","price":6570.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/9773\/6705\/files\/CT-Generic1_420b10af-9300-45e9-92db-aab67a7ab553.png?v=1792688490"},{"product_id":"paragon-dragon-24-front-loading-kiln","title":"Paragon Dragon 24 Front Loading Kiln","description":"\u003ch3\u003ePARAGON Dragon 24: Power, Precision, and Easy Front-Loading Access \u003c\/h3\u003e\n\u003cp\u003eThe PARAGON Dragon 24 is not just a kiln—it’s a professional-grade, front-loading ceramic furnace, purpose-built for potters, sculptors, and ceramic artists who need industrial performance, intuitive loading, and flawless temperature control. With its high-power output, extra insulation, and generous interior space, the Dragon delivers high-fire results with remarkable efficiency—firing to cone 10 (2350°F) with room to spare.\u003c\/p\u003e\n\u003cp\u003eUnlike top-loading kilns, the Dragon gives you clear sightlines, open access, and the ability to safely load large or delicate pieces. Whether you’re building tall sculptures, running production batches, or creating crystalline-glazed masterpieces, the Dragon gives you the space, stability, and visibility you need—without the risk or strain of vertical loading.\u003c\/p\u003e\n\u003ch3\u003eExceptional Power with Tuned Element Design\u003c\/h3\u003e\n\u003cp\u003eAt the heart of the Dragon is its 16,500-watt power system, which heats the 24\" wide x 24\" deep x 27\" high interior quickly and evenly. That power is distributed through industrial-gauge heating elements protected in dropped, recessed wall grooves for long-lasting performance.\u003c\/p\u003e\n\u003cp\u003eThe elements are “tuned”—meaning they’re specifically calibrated with hotter coils at the top and bottom of the chamber to correct for natural temperature imbalances. This tuning helps maintain uniform heat throughout the kiln, even on complex or tall loads.\u003c\/p\u003e\n\u003cp\u003eOptional door elements can further improve temperature consistency, particularly when firing heavy work or full-volume loads. Best of all, this upgrade does not increase the kiln’s overall amperage.\u003c\/p\u003e\n\u003ch3\u003eEnergy Efficiency That Pays Off\u003c\/h3\u003e\n\u003cp\u003eThe Dragon is built with 4” of insulation throughout the walls, door, and lid, made from 3” of firebrick backed by 1” of ceramic fiber block. The floor is even thicker at 4½”, ensuring minimal heat loss and extended element life.\u003c\/p\u003e\n\u003cp\u003eThis high-efficiency build offers multiple benefits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eLower case temperatures (170°F at cone 10 vs. 400–500°F in standard kilns)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eReduced electricity use for long high-fire cycles\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eExcellent down-firing performance for crystalline glazes and iron-rich finishes\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe result: dramatic glaze effects, long cooling cycles without power, and cost savings over the life of the kiln.\u003c\/p\u003e\n\u003ch3\u003eThoughtful, User-Friendly Design\u003c\/h3\u003e\n\u003cp\u003eThe front-loading door swings open a full 160 degrees on a robust ¾” steel rod with sealed bearings. Spring-loaded latches apply even pressure for a tight thermal seal, and the recessed inner door face minimizes heat leakage.\u003c\/p\u003e\n\u003cp\u003eThe kiln’s hinged switch box is generously vented to keep electrical components cool and opens fully for fast, tool-free maintenance. A folding support arm holds the panel open, providing ample workspace around relays, wires, and terminals. Inside, you’ll find UL and NEC-compliant fuses and long-life mercury relays (or optional solid state relays) powering the heating elements with stability and precision.\u003c\/p\u003e\n\u003cp\u003eDespite its heavy-duty build, the Dragon can fit through a 34” doorway—just remove the handles and rear element cover temporarily.\u003c\/p\u003e\n\u003ch3\u003eStandard Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eSentinel Touch Xpress (or optional Genesis touchscreen) controller\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCone 10, 2350°F max temperature\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e9 cubic foot capacity (24\" W x 24\" D x 27\" H)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e3” firebrick + 1” ceramic fiber block in walls, top, and door\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e4 ½” firebrick floor for added thermal mass\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLong-life mercury relays (solid state optional)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHinged, vented switch box with folding support arm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eProportional power elements for precise heat distribution\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRecessed door for better thermal seal\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTwo 1” peepholes on left side\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eType K thermocouple (Type S optional)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1\" clearance between kiln and switch box to keep components cool\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAvailable in 200, 208, 220, 240, or 480 volts (single or 3-phase)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUL\/NEC-compliant fusing for safety\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMade in the USA\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Perfect Kiln For:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eCeramic studios needing high-volume, high-temperature performance\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePotters firing porcelain, stoneware, or crystalline glazes\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSculptors working with tall or fragile workpieces\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eEducators or production artists who need full visibility and safe, ergonomic loading\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eStudios ready to move up from top-loaders to professional front-load access\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOptional Upgrades to Customize Your Dragon\u003c\/h3\u003e\n\u003cp\u003eHeavy-Duty Stand (Optional): For residential or school environments, we strongly recommend the optional stand with locking casters. It supports the kiln’s 900+ lbs with ease and makes movement far more manageable through narrow doorways or uneven floors. Due to weight, casters are very difficult to install after delivery.\u003c\/p\u003e\n\u003cp\u003eFurniture Kit (Optional): Includes shelves and posts designed specifically for the Dragon’s 9 cubic foot interior. Stack ware efficiently and take full advantage of vertical space:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e1 – Full shelf (22\" x 22\")\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e4 – Half shelves (22\" x 11\")\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e8 posts each of 4\", 6\", and 8\" heights\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1 lb kiln wash\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOrton Vent Master Kiln Vent (Optional):\u003cstrong\u003e \u003c\/strong\u003eFactory-installed on the kiln’s rear, this system improves glaze clarity and color saturation by pulling in fresh oxygen and removing fumes. It's especially helpful for firing red and orange glazes, metallics, and lusters in shared spaces. The Vent Master also reduces carbon buildup and helps eliminate common glaze flaws like pinholes and bloating.\u003c\/p\u003e\n\u003ch3\u003eBuilt with Pride in Mesquite, Texas\u003c\/h3\u003e\n\u003cp\u003eEvery Paragon kiln is handcrafted in Mesquite, Texas by a dedicated team of skilled craftsmen and craftswomen. With decades of experience behind us, we take pride in building kilns that deliver lasting performance, precision, and peace of mind.\u003c\/p\u003e\n\u003cp\u003eFrom our engineers to our assembly team, we stand behind every kiln we make—because we know what it means to invest in your craft. When you choose Paragon, you're not just buying a kiln—you're gaining the backing of a company that truly cares about your success.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInterior: 24″ W × 24″ D × 27″ H (9 cu ft)\u003c\/li\u003e\n\u003cli\u003eMax temperature: 2,350°F (cone 10)\u003c\/li\u003e\n\u003cli\u003eElectrical configurations: 208V, 208V 3-phase, 240V (confirm amperage, plug and circuit with your electrician)\u003c\/li\u003e\n\u003cli\u003eManufacturer part number (base configuration): 706111BA00\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePriced for the base configuration. Options (voltage, stands, vents, relays, windows) are quoted on request. Specifications subject to change by the manufacturer.\u003c\/p\u003e\u003ch3\u003eShipping, lead time \u0026amp; ordering\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade to order\u003c\/strong\u003e in the USA and shipped direct from the manufacturer in Mesquite, TX. We confirm current lead time with you when you order.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips by motor freight (LTL truck)\u003c\/strong\u003e — freight is quoted upfront, before you pay for it. Residential liftgate delivery is available.\u003c\/li\u003e\n\u003cli\u003eQuestions? Call (737) 231-1880 or use \u003ca href=\"\/pages\/how-can-we-help\"\u003eGet a Quote\u003c\/a\u003e. Try our \u003ca href=\"\/pages\/electrical-readiness-checker\"\u003eElectrical Readiness Checker\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e and \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Paragon","offers":[{"title":"Default Title","offer_id":50925417496833,"sku":"706111BA00","price":9900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/9773\/6705\/files\/Dragon24_-_Studio.png?v=1792688490"},{"product_id":"paragon-super-dragon-27-kiln-with-stand","title":"Paragon Super Dragon 27 Kiln with Stand","description":"\u003ch3\u003ePARAGON Dragon 27 : The Super Dragon for Serious Ceramic Production\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt for the Demands of High-Fire, High-Volume Studios\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe PARAGON Dragon 27 Pro, known as the Super Dragon, is Paragon’s most powerful front-loading kiln, engineered for artists, educators, and production studios that demand uncompromising performance, durability, and ease of access. With its massive 15.18 cubic foot interior, heavy-duty construction, and 21,600 watts of firing power, the Super Dragon easily reaches cone 10 (2350°F) while delivering the long-term reliability Paragon is known for.\u003c\/p\u003e\n\u003cp\u003eDesigned for professionals who fire frequently and at full capacity, the Super Dragon offers exceptional thermal control, even heat distribution, and a front-loading configuration that simplifies the firing of tall work, stacked ware, and delicate pieces—without the strain or risk of top-loading.\u003c\/p\u003e\n\u003ch3\u003eSerious Power for Serious Work\u003c\/h3\u003e\n\u003cp\u003eAt the heart of the Super Dragon is its 21,600-watt industrial-grade element system, seated in dropped, recessed grooves for protection and stability. The kiln’s generous 27\" W x 27\" D x 36\" H chamber is one of the largest in its class, offering unmatched flexibility for firing:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eTall sculptures\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMultiple large platters or bowls\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLarge-volume bisque and glaze loads\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCrystalline and specialty glazes requiring extended slow cooling\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWith plenty of power to spare, the elements operate with less strain during high-fire cycles, extending their service life and ensuring more consistent results over time.\u003c\/p\u003e\n\u003ch3\u003eHeavy-Duty Insulation for Thermal Efficiency\u003c\/h3\u003e\n\u003cp\u003eThe\u003cstrong\u003e \u003c\/strong\u003eSuper Dragon is wrapped in 4 inches of insulation on all sides—3” thick firebrick backed by 1” of ceramic fiber block—making it remarkably efficient at heat retention. The 4 ½” firebrick floor adds extra thermal mass for long, steady holds and gradual cooling.\u003c\/p\u003e\n\u003cp\u003eThis extra insulation enables a feature many potters prize: natural down-firing. After peak temperature is reached, the kiln cools slowly without needing to reheat, allowing for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eRicher glaze development\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFuller microcrystalline structure in specialty glazes\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIron red and gas-like effects in oxidation firings\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCase temperatures stay impressively low—around 170°F at cone 10, compared to 400–500°F on traditional kilns—adding safety and studio comfort.\u003c\/p\u003e\n\u003ch3\u003eDesigned for Front-Loading Convenience\u003c\/h3\u003e\n\u003cp\u003eWhether you’re working with delicate figurines or heavy production batches, the front-loading design makes all the difference. The door opens wide for full access to the chamber and is supported by a heavy-duty ¾” steel rod and sealed bearings for smooth motion and durability. Spring-loaded latches press the door shut for a tight, consistent seal.\u003c\/p\u003e\n\u003cp\u003eFrom easy shelf stacking to stress-free sculpture placement, the Super Dragon allows you to load and fire with visibility, control, and safety.\u003c\/p\u003e\n\u003ch3\u003eBuilt for Production Environments\u003c\/h3\u003e\n\u003cp\u003eThe Super Dragon was designed with daily, high-frequency use in mind. Firing every day? No problem. The kiln’s Paragon warranty remains valid regardless of how often you fire, even in a commercial or institutional setting.\u003c\/p\u003e\n\u003cp\u003eA built-in stand is included with every unit, providing sturdy, permanent support for the kiln’s 900+ lb frame. The kiln will fit through a 42\" doorway when handles and the back element cover are temporarily removed.\u003c\/p\u003e\n\u003cp\u003eAlso, this kiln comes equipped with the KilnVent Master System, designed to vent fumes and optimize firing conditions inside the oven. This system enhances temperature uniformity, helping ensure consistent results, while also extending the life of the heating elements and thermocouples.\u003c\/p\u003e\n\u003ch3\u003eIntelligent Digital Control\u003c\/h3\u003e\n\u003cp\u003eThe Super Dragon includes the Sentinel Smart Touch controller as standard. This touchscreen interface makes it easy to set and repeat complex firing schedules with precision. Features include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eIntuitive, icon-based navigation\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e30+ user-programmable slots\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUp to 32 segments per schedule\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMid-fire editing (add\/skip segments, adjust hold\/temp)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAlarm and diagnostics system\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWi-Fi enabled for remote updates and monitoring\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdvanced Thermal Sensing\u003c\/h3\u003e\n\u003cp\u003eThe Super Dragon includes a ¼” wide, Type K exposed-tip thermocouple made with special limit wire for maximum accuracy and responsiveness. The exposed tip ensures the controller reacts quickly to chamber temperature changes—ideal for complex glaze cycles and long hold profiles.\u003c\/p\u003e\n\u003ch3\u003eBuilt with Pride in Mesquite, Texas\u003c\/h3\u003e\n\u003cp\u003eEvery Paragon kiln is handcrafted in Mesquite, Texas by a dedicated team of skilled craftsmen and craftswomen. With decades of experience behind us, we take pride in building kilns that deliver lasting performance, precision, and peace of mind.\u003c\/p\u003e\n\u003cp\u003eFrom our engineers to our assembly team, we stand behind every kiln we make—because we know what it means to invest in your craft. When you choose Paragon, you're not just buying a kiln—you're gaining the backing of a company that truly cares about your success.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInterior: 27″ W × 27″ D × 36″ H (15.19 cu ft)\u003c\/li\u003e\n\u003cli\u003eMax temperature: 2,350°F (cone 10)\u003c\/li\u003e\n\u003cli\u003eElectrical configurations: 208V 3-phase (confirm amperage, plug and circuit with your electrician)\u003c\/li\u003e\n\u003cli\u003eManufacturer part number (base configuration): S1778-87\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePriced for the base configuration. Options (voltage, stands, vents, relays, windows) are quoted on request. Specifications subject to change by the manufacturer.\u003c\/p\u003e\u003ch3\u003eShipping, lead time \u0026amp; ordering\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade to order\u003c\/strong\u003e in the USA and shipped direct from the manufacturer in Mesquite, TX. We confirm current lead time with you when you order.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips by motor freight (LTL truck)\u003c\/strong\u003e — freight is quoted upfront, before you pay for it. Residential liftgate delivery is available.\u003c\/li\u003e\n\u003cli\u003eQuestions? Call (737) 231-1880 or use \u003ca href=\"\/pages\/how-can-we-help\"\u003eGet a Quote\u003c\/a\u003e. Try our \u003ca href=\"\/pages\/electrical-readiness-checker\"\u003eElectrical Readiness Checker\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eSee our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e and \u003ca href=\"\/policies\/refund-policy\"\u003eReturn Policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Paragon","offers":[{"title":"Default Title","offer_id":50925417562369,"sku":"S1778-87","price":15750.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/9773\/6705\/files\/S1778.png?v=1792688489"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/9773\/6705\/collections\/x-large-kilns-icon.png?v=1793037700","url":"https:\/\/kilnnation.com\/collections\/x-large-kilns.oembed","provider":"Kiln Nation","version":"1.0","type":"link"}